Hardware Engineer - Reading - Comptetive Salary VIQU have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in Reading and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Hardware Engineer - - Must be a British citizen. - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineers. - Experience overseeing and quality checking drawings of junior engineers. - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations Benefits of the Hardware Engineer - - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Hardware Engineer - Reading - Comptetive Salary To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Jack McManus emailing (see below) If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
16/09/2024
Full time
Hardware Engineer - Reading - Comptetive Salary VIQU have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in Reading and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Hardware Engineer - - Must be a British citizen. - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineers. - Experience overseeing and quality checking drawings of junior engineers. - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations Benefits of the Hardware Engineer - - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Hardware Engineer - Reading - Comptetive Salary To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Jack McManus emailing (see below) If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Job Title: Principal Electrical CAD Designer Location: London Rate: Market rates Duration: 6 months with possible extension A key member of the Hardware Engineering team, this role will be to create and review electrical designs and drawings to deliver on a Defence maritime platform management project. Due to continued growth to support a high profile project, this role is increasing our existing Electrical CAD Design team capability and experience. Key Responsibilities Produce electrical schematics using AutoCAD electrical Support the creation and management of Bills of Materials (BOM) Provide electrical engineering support to the Electrical Design Engineering team Develop component libraries to support schematics Review electrical schematics in accordance with relevant standards and internal Computer Aided Design (CAD) processes. Maintain documents and drawings through development and production changes Support schedule and work package estimates, where required Collaboratively support other engineering functions from a mechanical drawing perspective To be aware of and comply with company standards of conduct and all relevant statutory requirements. Raise and action Change Notes (CN) Manage and adhere to configuration management processes for baseline control throughout the full project life cycle Review output of junior members of the team General Operational duties Attend department meetings as required Remain compliant with all applicable processes and procedures Support the Electrical Line Manager in developing and growing a professional and engaged team Competency/Skill requirements Good attention to detail Organised, adept at workload management and prioritising appropriately to meet deadlines Flexible and responsive to changing priorities Proactive team worker, equally self-motivated and able to work autonomously Proficient user of AutoCAD Electrical or similar Person Specification Essential qualifications/experience Strong experience in an Electrical CAD position Understanding and working knowledge of electrical related Defence Standards, including Lloyds Register and other Military Standards (eg Def Stan 59-411) Ability to work independently on own initiative, as well as within a collaborative team environment Ability to work under pressure in a complex and rapidly changing environment Hold SC clearance or ability to achieve it Preferred qualifications/experience Experience of working within a regulated industry (eg automotive, aviation, defence, rail etc.) Experience in the use of Windchill PLM Understanding and working knowledge of Defence programs Other requirements Clearance requirements: Post-holder must/able to hold and maintain UK Government clearances where required If this is the role for you please submit your CV at your earliest convenience
16/09/2024
Contractor
Job Title: Principal Electrical CAD Designer Location: London Rate: Market rates Duration: 6 months with possible extension A key member of the Hardware Engineering team, this role will be to create and review electrical designs and drawings to deliver on a Defence maritime platform management project. Due to continued growth to support a high profile project, this role is increasing our existing Electrical CAD Design team capability and experience. Key Responsibilities Produce electrical schematics using AutoCAD electrical Support the creation and management of Bills of Materials (BOM) Provide electrical engineering support to the Electrical Design Engineering team Develop component libraries to support schematics Review electrical schematics in accordance with relevant standards and internal Computer Aided Design (CAD) processes. Maintain documents and drawings through development and production changes Support schedule and work package estimates, where required Collaboratively support other engineering functions from a mechanical drawing perspective To be aware of and comply with company standards of conduct and all relevant statutory requirements. Raise and action Change Notes (CN) Manage and adhere to configuration management processes for baseline control throughout the full project life cycle Review output of junior members of the team General Operational duties Attend department meetings as required Remain compliant with all applicable processes and procedures Support the Electrical Line Manager in developing and growing a professional and engaged team Competency/Skill requirements Good attention to detail Organised, adept at workload management and prioritising appropriately to meet deadlines Flexible and responsive to changing priorities Proactive team worker, equally self-motivated and able to work autonomously Proficient user of AutoCAD Electrical or similar Person Specification Essential qualifications/experience Strong experience in an Electrical CAD position Understanding and working knowledge of electrical related Defence Standards, including Lloyds Register and other Military Standards (eg Def Stan 59-411) Ability to work independently on own initiative, as well as within a collaborative team environment Ability to work under pressure in a complex and rapidly changing environment Hold SC clearance or ability to achieve it Preferred qualifications/experience Experience of working within a regulated industry (eg automotive, aviation, defence, rail etc.) Experience in the use of Windchill PLM Understanding and working knowledge of Defence programs Other requirements Clearance requirements: Post-holder must/able to hold and maintain UK Government clearances where required If this is the role for you please submit your CV at your earliest convenience
Job Title: Lead Electrical Engineer Location: Clevedon, UK Duration: Permanent Salary: £59k pa iO is looking to recruit an experienced Lead Electrical Engineer to work with a leader in mitigation and abatement worldwide, they are dedicated to reducing the adverse effects of semiconductor manufacturing on the environment and the natural world. The Lead Electrical Engineer will be responsible for inspiring, guiding, and empowering a developing group of electrical engineers working on semiconductor equipment manufacturing. The scope of work will include concept to customer commissioning and field trials. Using best practices in engineering, on-time delivery, adherence to specifications, and budgetary constraints will all be ensured. Requirements: Degree: Electrical engineering bachelor's degree (essential) or proof of equivalent. Considerable experience in the real-world application of electrical engineering, product development, and best practices in a relevant engineering sector. Proven ability to lead and manage teams of electrical engineers and approximately ten or more individuals in a project-based setting. Responsibilities: Serve as the backbone of our engineering and product development teams, utilising engineering tools and techniques to remove uncertainty from the work and produce solutions that are efficient, cost-effective, and compliant with standards and directives. Effectively collaborate with our engineering teams and exert influence over them to guarantee that work packages and deliverables are clear and that technical problems are resolved by finding the best solution. Assume responsibility for the technical aspects of the product system and/or subsystem design, recognising risks, taking appropriate control and mitigation measures, and elevating problems to a higher level of resolution when needed. Take responsibility for the safety and type testing of any system or subsystem for which you are in charge, as well as for confirming and validating its compliance. The team will examine and approve any reports produced in this regard. If you are currently looking to take the next step into your career with a leading developer and manufacturer company, then this is the role for you. Please reply to this job
16/09/2024
Full time
Job Title: Lead Electrical Engineer Location: Clevedon, UK Duration: Permanent Salary: £59k pa iO is looking to recruit an experienced Lead Electrical Engineer to work with a leader in mitigation and abatement worldwide, they are dedicated to reducing the adverse effects of semiconductor manufacturing on the environment and the natural world. The Lead Electrical Engineer will be responsible for inspiring, guiding, and empowering a developing group of electrical engineers working on semiconductor equipment manufacturing. The scope of work will include concept to customer commissioning and field trials. Using best practices in engineering, on-time delivery, adherence to specifications, and budgetary constraints will all be ensured. Requirements: Degree: Electrical engineering bachelor's degree (essential) or proof of equivalent. Considerable experience in the real-world application of electrical engineering, product development, and best practices in a relevant engineering sector. Proven ability to lead and manage teams of electrical engineers and approximately ten or more individuals in a project-based setting. Responsibilities: Serve as the backbone of our engineering and product development teams, utilising engineering tools and techniques to remove uncertainty from the work and produce solutions that are efficient, cost-effective, and compliant with standards and directives. Effectively collaborate with our engineering teams and exert influence over them to guarantee that work packages and deliverables are clear and that technical problems are resolved by finding the best solution. Assume responsibility for the technical aspects of the product system and/or subsystem design, recognising risks, taking appropriate control and mitigation measures, and elevating problems to a higher level of resolution when needed. Take responsibility for the safety and type testing of any system or subsystem for which you are in charge, as well as for confirming and validating its compliance. The team will examine and approve any reports produced in this regard. If you are currently looking to take the next step into your career with a leading developer and manufacturer company, then this is the role for you. Please reply to this job
Leading Energy Technology Company Seeks Senior/Lead Electronics Engineer Lynx Recruitment is working with an energy technology company close to Bath to recruit either a Senior or Lead Electronics Engineer. Responsibilities: Lead electronics solutions development Design analog and digital hardware Develop Embedded software Create design specifications Participate in design reviews Provide technical guidance Improve internal design processes Represent team in client meetings Requirements: 5+ years experience in product development BA or higher in Electrical/Electronics Engineering Expertise in analog/digital hardware, Embedded software, DSP Experience with microprocessors, C programming, data acquisition PCB design and schematic capture skills Strong problem-solving and communication abilities The company offers a competitive salary in the range of £70,000 - £90,000, pension, health insurance, bonuses, and 25 days holiday. Apply today for immediate consideration! We look forward to working with you to secure the position.
16/09/2024
Full time
Leading Energy Technology Company Seeks Senior/Lead Electronics Engineer Lynx Recruitment is working with an energy technology company close to Bath to recruit either a Senior or Lead Electronics Engineer. Responsibilities: Lead electronics solutions development Design analog and digital hardware Develop Embedded software Create design specifications Participate in design reviews Provide technical guidance Improve internal design processes Represent team in client meetings Requirements: 5+ years experience in product development BA or higher in Electrical/Electronics Engineering Expertise in analog/digital hardware, Embedded software, DSP Experience with microprocessors, C programming, data acquisition PCB design and schematic capture skills Strong problem-solving and communication abilities The company offers a competitive salary in the range of £70,000 - £90,000, pension, health insurance, bonuses, and 25 days holiday. Apply today for immediate consideration! We look forward to working with you to secure the position.
Leading Test and Measurement Equipment Manufacturer Seeks Electronics Repair Technician Our client, a global leader in test and measurement equipment, is seeking a skilled Electronics Repair Technician to join their team. This role offers the excitement of a startup atmosphere combined with the stability and resources of a Fortune 500 company. Responsibilities: Perform repairs and modifications on customer reference equipment to component level Support the calibration laboratory and ensure maintenance and corrective actions are carried out Work collaboratively with other teams to achieve KPIs and objectives Follow and support the ISO 17025 Quality Standard Manage incoming and outgoing service requests for calibration, inspection, and repair Contribute to service revenue growth with a proactive approach to customer care Requirements: Minimum 2+ years of work experience in electronics repair, familiarity with calibration equipment preferred HNC/HND in Electrical Electronics Ability to interpret technical documents (schematics/drawings) and standard work instructions Strong PC skills, proficient in MS Office with working knowledge of Excel Excellent communication skills and ability to adapt in a dynamic business environment Experience with hand soldering and rework equipment Familiarity with health and safety regulations in a workshop environment Our client offers: Competitive salary and benefits package Opportunities for personal growth and continuous development Positive working environment with a diverse, respectful team Chance to work with cutting-edge technology and contribute to keeping the world running If you are passionate about electronics, have a keen eye for detail, and enjoy solving complex technical challenges We look forward to hearing from you!
16/09/2024
Full time
Leading Test and Measurement Equipment Manufacturer Seeks Electronics Repair Technician Our client, a global leader in test and measurement equipment, is seeking a skilled Electronics Repair Technician to join their team. This role offers the excitement of a startup atmosphere combined with the stability and resources of a Fortune 500 company. Responsibilities: Perform repairs and modifications on customer reference equipment to component level Support the calibration laboratory and ensure maintenance and corrective actions are carried out Work collaboratively with other teams to achieve KPIs and objectives Follow and support the ISO 17025 Quality Standard Manage incoming and outgoing service requests for calibration, inspection, and repair Contribute to service revenue growth with a proactive approach to customer care Requirements: Minimum 2+ years of work experience in electronics repair, familiarity with calibration equipment preferred HNC/HND in Electrical Electronics Ability to interpret technical documents (schematics/drawings) and standard work instructions Strong PC skills, proficient in MS Office with working knowledge of Excel Excellent communication skills and ability to adapt in a dynamic business environment Experience with hand soldering and rework equipment Familiarity with health and safety regulations in a workshop environment Our client offers: Competitive salary and benefits package Opportunities for personal growth and continuous development Positive working environment with a diverse, respectful team Chance to work with cutting-edge technology and contribute to keeping the world running If you are passionate about electronics, have a keen eye for detail, and enjoy solving complex technical challenges We look forward to hearing from you!
Senior Hardware Engineer - Ashford, Kent Join our client as a Senior Hardware Engineer and contribute to the development of cutting-edge life science and medical products that will have a positive impact on the world. Based at their offices in Ashford, Kent, this is an exceptional opportunity. Key Responsibilities: Digital/analogue electronics and firmware design of products from concept through to production, with a focus on FPGA and VHDL System architectural design and concepts Schematic and board layout using Altium Designer CAD tool Prototype build, test, and fault-finding Specification and requirements capture EMC and electrical safety compliance support Cost model generation, RoHS analysis, and compilation Possible oversight of junior engineers Ideal Candidate Profile: Demonstrable experience in digital and analogue design Embedded programming expertise in C, FPGA VHDL, and advantageous experience in C++, .NET, C#, Java, or Python Familiarity with CAD tools, such as Altium, for schematic capture and PCB layout Some exposure to EMC compliance design techniques and knowledge of safety and EMC standards Clear and concise report writing with good attention to detail Competency with Microsoft Office products Willing to take on tasks as deemed necessary for the project Good presentation and communication skills Ideally 8+ years of design experience, though exceptional candidates with lower experience will be considered Benefits: Remote work, 2 days per week 8% non-contributory pension (You contribute £0) 25 days annual leave, plus 8 bank holidays Simply Health medical cover Life insurance Early finish Fridays SAYE scheme Cycle to work scheme Apply now for immediate consideration!
16/09/2024
Full time
Senior Hardware Engineer - Ashford, Kent Join our client as a Senior Hardware Engineer and contribute to the development of cutting-edge life science and medical products that will have a positive impact on the world. Based at their offices in Ashford, Kent, this is an exceptional opportunity. Key Responsibilities: Digital/analogue electronics and firmware design of products from concept through to production, with a focus on FPGA and VHDL System architectural design and concepts Schematic and board layout using Altium Designer CAD tool Prototype build, test, and fault-finding Specification and requirements capture EMC and electrical safety compliance support Cost model generation, RoHS analysis, and compilation Possible oversight of junior engineers Ideal Candidate Profile: Demonstrable experience in digital and analogue design Embedded programming expertise in C, FPGA VHDL, and advantageous experience in C++, .NET, C#, Java, or Python Familiarity with CAD tools, such as Altium, for schematic capture and PCB layout Some exposure to EMC compliance design techniques and knowledge of safety and EMC standards Clear and concise report writing with good attention to detail Competency with Microsoft Office products Willing to take on tasks as deemed necessary for the project Good presentation and communication skills Ideally 8+ years of design experience, though exceptional candidates with lower experience will be considered Benefits: Remote work, 2 days per week 8% non-contributory pension (You contribute £0) 25 days annual leave, plus 8 bank holidays Simply Health medical cover Life insurance Early finish Fridays SAYE scheme Cycle to work scheme Apply now for immediate consideration!
RF Design Engineer (Power Amplification and Power Supply Units) Location: Bristol, UK (Hybrid) Salary: £60,000 - £90,000 DOE Summary Lynx Recruitment is working with an electronics client in Bristol to recruit a skilled RF Design Engineer to join the team. The successful candidate will focus on the design and development of solid-state power amplification and power supply units for our cutting-edge microwave systems. Key Responsibilities: Design, simulate, and test RF power amplifiers and power supply units using Microwave Office software Optimise designs for performance, efficiency, and reliability Collaborate with cross-functional teams to integrate designs into larger systems Conduct rigorous testing and troubleshoot issues to ensure product quality Stay up-to-date with the latest advancements in RF technology and incorporate them into designs Document design processes, test results, and technical specifications Required Qualifications: Bachelor's or Master's degree in Electrical Engineering, Physics, or a related field (or relevant experience) Minimum of 5 years of experience in RF design, with a focus on power amplification and power supply units Strong proficiency in Microwave Office software Solid understanding of RF theory, microwave circuits, and power electronics Experience with solid-state power amplification design Familiarity with power supply unit design is highly desirable Excellent problem-solving and analytical skills Strong communication and teamwork abilities The company offers a wide salary range of £60,000 - £90,000, depending on experience, and a hybrid work model that balances in-office collaboration with remote work flexibility, alongside an impressive benefits package. If you'd like the opportunity to work on ground-breaking projects and advance your career in a dynamic, innovative environment, please apply now!
16/09/2024
Full time
RF Design Engineer (Power Amplification and Power Supply Units) Location: Bristol, UK (Hybrid) Salary: £60,000 - £90,000 DOE Summary Lynx Recruitment is working with an electronics client in Bristol to recruit a skilled RF Design Engineer to join the team. The successful candidate will focus on the design and development of solid-state power amplification and power supply units for our cutting-edge microwave systems. Key Responsibilities: Design, simulate, and test RF power amplifiers and power supply units using Microwave Office software Optimise designs for performance, efficiency, and reliability Collaborate with cross-functional teams to integrate designs into larger systems Conduct rigorous testing and troubleshoot issues to ensure product quality Stay up-to-date with the latest advancements in RF technology and incorporate them into designs Document design processes, test results, and technical specifications Required Qualifications: Bachelor's or Master's degree in Electrical Engineering, Physics, or a related field (or relevant experience) Minimum of 5 years of experience in RF design, with a focus on power amplification and power supply units Strong proficiency in Microwave Office software Solid understanding of RF theory, microwave circuits, and power electronics Experience with solid-state power amplification design Familiarity with power supply unit design is highly desirable Excellent problem-solving and analytical skills Strong communication and teamwork abilities The company offers a wide salary range of £60,000 - £90,000, depending on experience, and a hybrid work model that balances in-office collaboration with remote work flexibility, alongside an impressive benefits package. If you'd like the opportunity to work on ground-breaking projects and advance your career in a dynamic, innovative environment, please apply now!
Test Engineer - Amplifiers Location: Bristol, UK (Hybrid) Salary: £45,000 - £65,000 DOE Summary Lynx Recruitment is working with an electronics client in Bristol to recruit a skilled Test Engineer with amplifier experience to join the team. The successful candidate will be responsible for developing and implementing test procedures for cutting-edge microwave amplifier systems, ensuring product quality and performance. Key Responsibilities: Design, develop, and implement test procedures for microwave amplifier systems Set up and maintain test equipment and environments for amplifier testing Conduct thorough testing of amplifier prototypes and production units Analyse test results and provide detailed reports to the design and production teams Troubleshoot and diagnose issues in amplifier performance Collaborate with RF design engineers to improve product quality and reliability Develop and maintain test automation scripts to increase efficiency Required Qualifications: Bachelor's or Master's degree in Electrical Engineering, Physics, or a related field (or relevant experience) Minimum of 3 years of experience in testing RF/microwave systems, with a focus on amplifiers Strong understanding of RF theory and microwave circuits Proficiency in using test equipment such as spectrum analysers, network analysers, and power meters Experience with automated test equipment (ATE) and test software development Familiarity with industry standards relevant to RF testing (eg, MIL-STD, IEC) Strong analytical and problem-solving skills Excellent attention to detail and ability to maintain accurate documentation The company offers a competitive salary range of £45,000 - £65,000, depending on experience, and a hybrid work model that balances in-office collaboration with remote work flexibility, alongside an impressive benefits package. If you'd like the opportunity to work on ground-breaking projects and advance your career in a dynamic, innovative environment, please apply now!
16/09/2024
Full time
Test Engineer - Amplifiers Location: Bristol, UK (Hybrid) Salary: £45,000 - £65,000 DOE Summary Lynx Recruitment is working with an electronics client in Bristol to recruit a skilled Test Engineer with amplifier experience to join the team. The successful candidate will be responsible for developing and implementing test procedures for cutting-edge microwave amplifier systems, ensuring product quality and performance. Key Responsibilities: Design, develop, and implement test procedures for microwave amplifier systems Set up and maintain test equipment and environments for amplifier testing Conduct thorough testing of amplifier prototypes and production units Analyse test results and provide detailed reports to the design and production teams Troubleshoot and diagnose issues in amplifier performance Collaborate with RF design engineers to improve product quality and reliability Develop and maintain test automation scripts to increase efficiency Required Qualifications: Bachelor's or Master's degree in Electrical Engineering, Physics, or a related field (or relevant experience) Minimum of 3 years of experience in testing RF/microwave systems, with a focus on amplifiers Strong understanding of RF theory and microwave circuits Proficiency in using test equipment such as spectrum analysers, network analysers, and power meters Experience with automated test equipment (ATE) and test software development Familiarity with industry standards relevant to RF testing (eg, MIL-STD, IEC) Strong analytical and problem-solving skills Excellent attention to detail and ability to maintain accurate documentation The company offers a competitive salary range of £45,000 - £65,000, depending on experience, and a hybrid work model that balances in-office collaboration with remote work flexibility, alongside an impressive benefits package. If you'd like the opportunity to work on ground-breaking projects and advance your career in a dynamic, innovative environment, please apply now!
Electronics Engineer Join a cutting-edge technology company revolutionizing the agricultural sector with advanced robotics solutions. We're seeking talented engineers to help shape the future of farming. Responsibilities: Design integrated PCBs for state-of-the-art robotic systems Lead prototype and testing activities Collaborate with cross-functional teams Debug issues and write technical documentation Requirements: Degree in electrical/electronic/mechatronic engineering 2+ years industry experience in PCB and electronics environments Experience with power supply and SMPS design Knowledge of Embedded systems and FPGAs Proficiency in KiCad and SolidWorks The role offers competitive salaries, share options, and the opportunity to work at the forefront of agricultural technology.
16/09/2024
Full time
Electronics Engineer Join a cutting-edge technology company revolutionizing the agricultural sector with advanced robotics solutions. We're seeking talented engineers to help shape the future of farming. Responsibilities: Design integrated PCBs for state-of-the-art robotic systems Lead prototype and testing activities Collaborate with cross-functional teams Debug issues and write technical documentation Requirements: Degree in electrical/electronic/mechatronic engineering 2+ years industry experience in PCB and electronics environments Experience with power supply and SMPS design Knowledge of Embedded systems and FPGAs Proficiency in KiCad and SolidWorks The role offers competitive salaries, share options, and the opportunity to work at the forefront of agricultural technology.
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
16/09/2024
Full time
Senior Electronic Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronics Design Engineer to join their team in Torquay. Key Responsibilities: Electronic design engineering from concept to manufacture and test Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Hybrid work model - 2 days WFH each week 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
16/09/2024
Full time
Senior Electronics Design Engineer Lynx Recruitment is working with a leading optics and photonics company, to recruit a Senior Electronic Systems Engineer to join their team in St Asaph, North Wales. Key Responsibilities: Lead the design of electronic sub-systems, including requirements analysis and specification development Design of Laser drivers, optical detection circuits, and digital control electronics Produce and maintain Embedded firmware/software for digital control of opto-electronic sub-systems Perform reliability and parts stress analysis, and manage obsolescence Support new business opportunities and generate solutions for customers Assist with the gate review and handover process from design to production Requirements: Industrial experience in an electronics design and development function Strong analog/digital/mixed signal circuit design skills Experience in firmware/software development for ARM-based microcontrollers Proficient in schematic capture and PCB layout (eg, Altium) Experience with prototyping and laboratory test equipment Bachelor's degree in Electrical and/or Electronics Engineering Benefits: Competitive salary up to £70k Hybrid work model - 2 days WFH 25 days holiday plus bank holidays Company pension (6% contribution) Company bonus scheme Health Cash Plan SAYE Scheme
Cutting-Edge Medical Hardware Engineering Role - Ashford, Kent Join our client as a Hardware Systems Engineer to work on transformative medical products that will improve lives. Based at their offices in Ashford, Kent, this is an exceptional opportunity. Key Responsibilities: Electronics and firmware design of products from concept through to production Prototype build, test, including specification and detailing of cabling Wiring, design, detailing, crimping, and build Test jig design, build, and assembly PCB testing and specification Cost model generation, RoHS analysis, and compilation Electrical safety testing Ideal Candidate Profile: Ability to client-face and communicate technical information effectively Demonstrable experience in digital and analogue design Embedded programming expertise in C, C++, C#, Java, Python, or algorithm development Familiarity with CAD tools, such as Altium, for schematic capture and PCB layout Some exposure to EMC compliance design techniques and knowledge of safety and EMC standards Clear and concise report writing with good attention to detail Competency with Microsoft Office products Hands-on, self-motivated, and willing to learn and help evolve the R&D department Benefits: Remote work, 2 days per week 8% non-contributory pension (you contribute £0) 25 days annual leave, plus 8 bank holidays Simply Health medical cover Life insurance Early finish Fridays SAYE scheme Cycle to work scheme Apply now for immediate consideration!
16/09/2024
Full time
Cutting-Edge Medical Hardware Engineering Role - Ashford, Kent Join our client as a Hardware Systems Engineer to work on transformative medical products that will improve lives. Based at their offices in Ashford, Kent, this is an exceptional opportunity. Key Responsibilities: Electronics and firmware design of products from concept through to production Prototype build, test, including specification and detailing of cabling Wiring, design, detailing, crimping, and build Test jig design, build, and assembly PCB testing and specification Cost model generation, RoHS analysis, and compilation Electrical safety testing Ideal Candidate Profile: Ability to client-face and communicate technical information effectively Demonstrable experience in digital and analogue design Embedded programming expertise in C, C++, C#, Java, Python, or algorithm development Familiarity with CAD tools, such as Altium, for schematic capture and PCB layout Some exposure to EMC compliance design techniques and knowledge of safety and EMC standards Clear and concise report writing with good attention to detail Competency with Microsoft Office products Hands-on, self-motivated, and willing to learn and help evolve the R&D department Benefits: Remote work, 2 days per week 8% non-contributory pension (you contribute £0) 25 days annual leave, plus 8 bank holidays Simply Health medical cover Life insurance Early finish Fridays SAYE scheme Cycle to work scheme Apply now for immediate consideration!
We are currently looking on behalf of one of our important clients for an Electromagnetics Engineer. The role is a permanent position based in Zürich. Your Role: Participate in a range of research projects in electromagnetics & associated applications. Provide scientific contributions to the theory, modelling, optimization & application of the EM near-field. Develop novel instrumentation, computational methods & characterization procedures. Participate in national & international standard activities (IEC, IEEE, etc.). Collaborate with external research partners & provision hardware support for customers. Your Skills & Experience: At least 2 years of professional experience with EM Simulation Software (eg COMSOL, ANSYS) and/or EM Measurement Instruments. Skilled & experience in Programming in C++ and/or Python. Ideally experienced in at least one of the following areas: Wireless Communication Systems, Radiofrequency Antenna Simulation & Measurements, Electrodynamics, Numerical Simulation of EM fields, Biomedical Engineering, Error Analysis & Uncertainty Conventions. Your Profile: Completed University Education, preferable to PhD level, in Electrical Engineering or Physics. Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
16/09/2024
Full time
We are currently looking on behalf of one of our important clients for an Electromagnetics Engineer. The role is a permanent position based in Zürich. Your Role: Participate in a range of research projects in electromagnetics & associated applications. Provide scientific contributions to the theory, modelling, optimization & application of the EM near-field. Develop novel instrumentation, computational methods & characterization procedures. Participate in national & international standard activities (IEC, IEEE, etc.). Collaborate with external research partners & provision hardware support for customers. Your Skills & Experience: At least 2 years of professional experience with EM Simulation Software (eg COMSOL, ANSYS) and/or EM Measurement Instruments. Skilled & experience in Programming in C++ and/or Python. Ideally experienced in at least one of the following areas: Wireless Communication Systems, Radiofrequency Antenna Simulation & Measurements, Electrodynamics, Numerical Simulation of EM fields, Biomedical Engineering, Error Analysis & Uncertainty Conventions. Your Profile: Completed University Education, preferable to PhD level, in Electrical Engineering or Physics. Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
Physics Graduate Working across all stages of Space and Science projects for imaging devices and sub-systems, you would take responsibility whenever a customer requirement needs to be verified or tested. This covers a wide range of hands-on, clean-room, and office-based engineering tasks relating to a variety of activities including electro-optical testing, electrical continuity testing, accelerated life testing, and mechanical stress testing. you would work closely with their project teams and manufacturing operatives to deliver high quality devices that meet demanding customer specifications. If you are passionate about world-leading space-based technology, thrive on big challenges with broad impact, and want to join a team tasked with continuously innovating to take the business to a completely new level, then this is a fantastic opportunity for you! Responsibilities On-time delivery and management of allocated work packages/tasks to the required standard. Writing project documentation including test plans, procedures and test reports. Training Operations staff where necessary. Commissioning test equipment in accordance with internal and customer specifications, including some Scripting and coding for ATE Performing technical investigations where necessary into failure modes and anomalous results. Supporting internal and customer meetings by presenting technical information and carrying out relevant actions. Supporting teams outside of the Product Verification Team, including Operations and Process Engineering. Actively participating in ensuring that quality assurance practices are adhered to and maintained throughout the project life cycle. Supporting, helping to identify, and carrying out process improvement activities for both project-specific and more general processes. Qualifications A physics or engineering related degree Understanding of semiconductor device physics Understanding of test development, commissioning and fault finding Experience using Labview or Matlab in an industrial or lab based environment Analysis skills
13/09/2024
Full time
Physics Graduate Working across all stages of Space and Science projects for imaging devices and sub-systems, you would take responsibility whenever a customer requirement needs to be verified or tested. This covers a wide range of hands-on, clean-room, and office-based engineering tasks relating to a variety of activities including electro-optical testing, electrical continuity testing, accelerated life testing, and mechanical stress testing. you would work closely with their project teams and manufacturing operatives to deliver high quality devices that meet demanding customer specifications. If you are passionate about world-leading space-based technology, thrive on big challenges with broad impact, and want to join a team tasked with continuously innovating to take the business to a completely new level, then this is a fantastic opportunity for you! Responsibilities On-time delivery and management of allocated work packages/tasks to the required standard. Writing project documentation including test plans, procedures and test reports. Training Operations staff where necessary. Commissioning test equipment in accordance with internal and customer specifications, including some Scripting and coding for ATE Performing technical investigations where necessary into failure modes and anomalous results. Supporting internal and customer meetings by presenting technical information and carrying out relevant actions. Supporting teams outside of the Product Verification Team, including Operations and Process Engineering. Actively participating in ensuring that quality assurance practices are adhered to and maintained throughout the project life cycle. Supporting, helping to identify, and carrying out process improvement activities for both project-specific and more general processes. Qualifications A physics or engineering related degree Understanding of semiconductor device physics Understanding of test development, commissioning and fault finding Experience using Labview or Matlab in an industrial or lab based environment Analysis skills
Electrical & Instrumentation Designer - £52 per hour Inside IR35 Lancashire - Hybrid (3 days onsite a week) - 6 months rolling Yolk recruitment is recruiting for an Electrical & Instrumentation Designer to work with a world leader in manufacturing and scientific research. You will be responsible for the creation and development of electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. This role supports the sites continuous improvement activities as well as supporting new Capital Project developments to meet business and site needs. Responsibilities: Estimation of costings for E/I design and installation Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Conducting FAT's on site and at supplier locations Reporting of work status to management in regular briefings Self-manage and progress design office requests to an agreed priority list Experience Required: HNC in Electrical Design or equivalent A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 A working knowledge in low voltage power system design A good knowledge in instrumentation and control loop design Desirable Experience: A working knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's) A working knowledge of motor control systems (Variable Speed Drives, Soft start, DOL) A working knowledge of safety systems and equipment including Safety Instrumented Systems IOSH or NEBOSH Are you up to the challenge? If you feel you have the skills, experience, and passion to be successful in this role, apply now. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
13/09/2024
Contractor
Electrical & Instrumentation Designer - £52 per hour Inside IR35 Lancashire - Hybrid (3 days onsite a week) - 6 months rolling Yolk recruitment is recruiting for an Electrical & Instrumentation Designer to work with a world leader in manufacturing and scientific research. You will be responsible for the creation and development of electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. This role supports the sites continuous improvement activities as well as supporting new Capital Project developments to meet business and site needs. Responsibilities: Estimation of costings for E/I design and installation Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Conducting FAT's on site and at supplier locations Reporting of work status to management in regular briefings Self-manage and progress design office requests to an agreed priority list Experience Required: HNC in Electrical Design or equivalent A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 A working knowledge in low voltage power system design A good knowledge in instrumentation and control loop design Desirable Experience: A working knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's) A working knowledge of motor control systems (Variable Speed Drives, Soft start, DOL) A working knowledge of safety systems and equipment including Safety Instrumented Systems IOSH or NEBOSH Are you up to the challenge? If you feel you have the skills, experience, and passion to be successful in this role, apply now. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.
BMS Engineer - London & Southeast - £50,000 An amazing opportunity for a BMS Engineer to join a leading Building Management Systems Controls company. They are looking to grow their dynamic team. The BMS Engineer Role BMS Engineer - London & Southeast - £50,000 - £55,000 An amazing opportunity for a BMS Engineer to join a leading Building Management Systems Controls company. They are looking to grow their dynamic team. The BMS Engineer Role You will be responsible for performing service visits, both reactive and planned preventative maintenance works (PPM) along with the commissioning of small project works and participation in an out of hours on-call rota. You will work closely with their clients on site, as well as their in-house support and Bureau team. Responsibilities Undertake planned preventative maintenance (PPM) visits Fault finding and repair of customer BMS and HVAC controls Commissioning of small projects Providing detailed and concise reports based upon your onsite activities Attend reactive call out visits across various client sites as a member of the on-call support rota Expand skills through development and training, as well as sharing knowledge and skills with others to aid in growth of the overall service delivery team Supporting and maintaining a collaborative working environment with internal and external customers and stakeholders Requirements Qualified in Electrical or Electronic Engineering Qualified or experience with Trend BMS systems. Knowledge or experience with Cylon, ALC, Siemens or Niagara would be advantageous but not essential Knowledge and experience in Trend IQ Vision/N4 would be advantageous but not essential Full, clean driving license What's in it for you? Company laptop and Mobile Phone EV car scheme Cycle to work scheme Annual Railcard Private Medical Insurance Life Insurance & Employee Assistance Helpline and Online GP Service Personal Pension Scheme (Up to 5% Matched) A dedicated annual professional development allowance 25 days annual leave increasing to 28 with length of service (+ bank holidays) Option to buy/sell up to 3 days annual leave Enhanced Family Leave 1 day to volunteer for a charity of your choice Bereavement Leave, up to 5 days Hybrid Working Free annual Flu Jab & Eye Test Up to one professional membership fee per year On-call bonus payment Person Profile To be successful in this role, you will have the ability to work as part of a team, understand project delivery techniques and be self-motivated and passionate about social and environmental issues with a mission driven mindset. Please Note: You will need to be eligible to work in the UK and Full UK Driving licence. Additional pay: Performance bonus Yearly bonus Benefits: Additional leave Company car Company pension Cycle to work scheme Employee discount Health & wellbeing programme Life insurance Private medical insurance Sick pay Store discount Schedule: Monday to Friday Overtime Application question(s): Experienced with Building Management Systems? Licence/Certification: Driving Licence (preferred) Responsibilities Undertake planned preventative maintenance (PPM) visits Fault finding and repair of customer BMS and HVAC controls Commissioning of small projects Providing detailed and concise reports based upon your onsite activities Attend reactive call out visits across various client sites as a member of the on-call support rota Expand skills through development and training, as well as sharing knowledge and skills with others to aid in growth of the overall service delivery team Supporting and maintaining a collaborative working environment with internal and external customers and stakeholders Requirements Qualified in Electrical or Electronic Engineering Qualified or experience with Trend BMS systems. Knowledge or experience with Cylon, ALC, Siemens or Niagara would be advantageous but not essential Knowledge and experience in Trend IQ Vision/N4 would be advantageous but not essential Full, clean driving license Person Profile To be successful in this role, you will have the ability to work as part of a team, understand project delivery techniques and be self-motivated and passionate about social and environmental issues with a mission driven mindset. Please Note: You will need to be eligible to work in the UK and Full UK Driving licence. Do you think you could be our next BMS Engineer? For more information on this fantastic opportunity that will help shape the future of BMS, please call Yvonne Ndlovu at Team BMS on Benefits: Additional leave Company car Company pension Cycle to work scheme Employee discount Health & wellbeing programme Life insurance Private medical insurance Sick pay Store discount Schedule: Monday to Friday Overtime Application question(s): Experienced with Building Management Systems? Licence/Certification: Driving Licence (preferred)
13/09/2024
Full time
BMS Engineer - London & Southeast - £50,000 An amazing opportunity for a BMS Engineer to join a leading Building Management Systems Controls company. They are looking to grow their dynamic team. The BMS Engineer Role BMS Engineer - London & Southeast - £50,000 - £55,000 An amazing opportunity for a BMS Engineer to join a leading Building Management Systems Controls company. They are looking to grow their dynamic team. The BMS Engineer Role You will be responsible for performing service visits, both reactive and planned preventative maintenance works (PPM) along with the commissioning of small project works and participation in an out of hours on-call rota. You will work closely with their clients on site, as well as their in-house support and Bureau team. Responsibilities Undertake planned preventative maintenance (PPM) visits Fault finding and repair of customer BMS and HVAC controls Commissioning of small projects Providing detailed and concise reports based upon your onsite activities Attend reactive call out visits across various client sites as a member of the on-call support rota Expand skills through development and training, as well as sharing knowledge and skills with others to aid in growth of the overall service delivery team Supporting and maintaining a collaborative working environment with internal and external customers and stakeholders Requirements Qualified in Electrical or Electronic Engineering Qualified or experience with Trend BMS systems. Knowledge or experience with Cylon, ALC, Siemens or Niagara would be advantageous but not essential Knowledge and experience in Trend IQ Vision/N4 would be advantageous but not essential Full, clean driving license What's in it for you? Company laptop and Mobile Phone EV car scheme Cycle to work scheme Annual Railcard Private Medical Insurance Life Insurance & Employee Assistance Helpline and Online GP Service Personal Pension Scheme (Up to 5% Matched) A dedicated annual professional development allowance 25 days annual leave increasing to 28 with length of service (+ bank holidays) Option to buy/sell up to 3 days annual leave Enhanced Family Leave 1 day to volunteer for a charity of your choice Bereavement Leave, up to 5 days Hybrid Working Free annual Flu Jab & Eye Test Up to one professional membership fee per year On-call bonus payment Person Profile To be successful in this role, you will have the ability to work as part of a team, understand project delivery techniques and be self-motivated and passionate about social and environmental issues with a mission driven mindset. Please Note: You will need to be eligible to work in the UK and Full UK Driving licence. Additional pay: Performance bonus Yearly bonus Benefits: Additional leave Company car Company pension Cycle to work scheme Employee discount Health & wellbeing programme Life insurance Private medical insurance Sick pay Store discount Schedule: Monday to Friday Overtime Application question(s): Experienced with Building Management Systems? Licence/Certification: Driving Licence (preferred) Responsibilities Undertake planned preventative maintenance (PPM) visits Fault finding and repair of customer BMS and HVAC controls Commissioning of small projects Providing detailed and concise reports based upon your onsite activities Attend reactive call out visits across various client sites as a member of the on-call support rota Expand skills through development and training, as well as sharing knowledge and skills with others to aid in growth of the overall service delivery team Supporting and maintaining a collaborative working environment with internal and external customers and stakeholders Requirements Qualified in Electrical or Electronic Engineering Qualified or experience with Trend BMS systems. Knowledge or experience with Cylon, ALC, Siemens or Niagara would be advantageous but not essential Knowledge and experience in Trend IQ Vision/N4 would be advantageous but not essential Full, clean driving license Person Profile To be successful in this role, you will have the ability to work as part of a team, understand project delivery techniques and be self-motivated and passionate about social and environmental issues with a mission driven mindset. Please Note: You will need to be eligible to work in the UK and Full UK Driving licence. Do you think you could be our next BMS Engineer? For more information on this fantastic opportunity that will help shape the future of BMS, please call Yvonne Ndlovu at Team BMS on Benefits: Additional leave Company car Company pension Cycle to work scheme Employee discount Health & wellbeing programme Life insurance Private medical insurance Sick pay Store discount Schedule: Monday to Friday Overtime Application question(s): Experienced with Building Management Systems? Licence/Certification: Driving Licence (preferred)
Job: Chinook Avionic Technician Location: Odiham Duration : 12months + Pay: £31ph via umbrella Our client is one of the worlds biggest Aerospace companies and are seeking an experienced Chinook Aircraft Technician to join them for the duration of 12 months. The successful candidate will be able to demonstrate the experience they have gained working on a CH47 and have a clear understanding of interpreting technical work requirements, documents and drawings they are used to. Candidates who wish to apply must be experienced in either the maintenance, modification and repair of aircraft and components, and/or aircraft wire harness manufacture and installation. What We Expect To See: An understanding of MAA Regulatory Articles (RA), MAA Regulatory Publication (MRP) Part 145, aviation Quality Assurance (QA) and Safety Management System (SMS). Confidence to perform maintenance activities, fault diagnosis and disturbed system functional tests. Ability to work with peers to perform tasks associated with aircraft safe handling, maintenance, modification and flight test. Responsibility to ensure established process adherence, accurate and timely work recording and contractual/regulatory compliance. Ability to perform the assembly, disassembly and modification of systems by conducting the change, removal, replacement or upgrade of aerospace vehicle components to correct failures or implement changes. Conducts assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Proficient in troubleshooting of complex pneumatic, hydraulic and associated electrical systems to isolate mechanical or electrical faults and repair faulty components. Validates and verifies testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (eg repairs test results applicable modifications and inspection results) Able to provide mentoring to peers and others Please note: To be considered for this role you must have maintained a recognised and certified aircraft apprenticeship or military equivalent. This role does not offer sponsorship before or after the contract, therefore should you be seeking sponsorship please do not apply.
13/09/2024
Contractor
Job: Chinook Avionic Technician Location: Odiham Duration : 12months + Pay: £31ph via umbrella Our client is one of the worlds biggest Aerospace companies and are seeking an experienced Chinook Aircraft Technician to join them for the duration of 12 months. The successful candidate will be able to demonstrate the experience they have gained working on a CH47 and have a clear understanding of interpreting technical work requirements, documents and drawings they are used to. Candidates who wish to apply must be experienced in either the maintenance, modification and repair of aircraft and components, and/or aircraft wire harness manufacture and installation. What We Expect To See: An understanding of MAA Regulatory Articles (RA), MAA Regulatory Publication (MRP) Part 145, aviation Quality Assurance (QA) and Safety Management System (SMS). Confidence to perform maintenance activities, fault diagnosis and disturbed system functional tests. Ability to work with peers to perform tasks associated with aircraft safe handling, maintenance, modification and flight test. Responsibility to ensure established process adherence, accurate and timely work recording and contractual/regulatory compliance. Ability to perform the assembly, disassembly and modification of systems by conducting the change, removal, replacement or upgrade of aerospace vehicle components to correct failures or implement changes. Conducts assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Proficient in troubleshooting of complex pneumatic, hydraulic and associated electrical systems to isolate mechanical or electrical faults and repair faulty components. Validates and verifies testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (eg repairs test results applicable modifications and inspection results) Able to provide mentoring to peers and others Please note: To be considered for this role you must have maintained a recognised and certified aircraft apprenticeship or military equivalent. This role does not offer sponsorship before or after the contract, therefore should you be seeking sponsorship please do not apply.
Data Centre Shift Engineer We are seeking an experienced Data Centre Shift Engineer, This is a fantastic opportunity to work in a dynamic environment where you'll play a key role in maintaining the electrical and mechanical systems of DC facilities. CONTINENTAL SHIFT PATTERN Key Duties & Responsibilities: Perform small lighting installations, fault-finding, and lamp replacements. Conduct emergency lighting tests. Maintain and troubleshoot control panels. Replace ballast in lighting systems. Monitor Building Management Systems (BMS), including hot and cold readings. Perform M&E (Mechanical & Electrical) Keep detailed records and maintain log books. Address basic plumbing issues, Service pumps and motors. Maintain Air Handling Units (AHUs) and Fan Coil Units (FCUs). Perform water treatment tasks including monitoring tap temperatures, flushing systems, and logging data. Requirements: City & Guilds Level 3 Electrical certification. Ability to provide copies of relevant trade certificates. Proven track record in commercial building maintenance. Multi-skilled across various aspects of M&E maintenance. Data Centre/critical Infrastructure experience If you meet the above criteria and are looking for a challenging role with great potential for growth, we want to hear from you! Apply now and become part of a dedicated team in a fast-paced environment.
12/09/2024
Full time
Data Centre Shift Engineer We are seeking an experienced Data Centre Shift Engineer, This is a fantastic opportunity to work in a dynamic environment where you'll play a key role in maintaining the electrical and mechanical systems of DC facilities. CONTINENTAL SHIFT PATTERN Key Duties & Responsibilities: Perform small lighting installations, fault-finding, and lamp replacements. Conduct emergency lighting tests. Maintain and troubleshoot control panels. Replace ballast in lighting systems. Monitor Building Management Systems (BMS), including hot and cold readings. Perform M&E (Mechanical & Electrical) Keep detailed records and maintain log books. Address basic plumbing issues, Service pumps and motors. Maintain Air Handling Units (AHUs) and Fan Coil Units (FCUs). Perform water treatment tasks including monitoring tap temperatures, flushing systems, and logging data. Requirements: City & Guilds Level 3 Electrical certification. Ability to provide copies of relevant trade certificates. Proven track record in commercial building maintenance. Multi-skilled across various aspects of M&E maintenance. Data Centre/critical Infrastructure experience If you meet the above criteria and are looking for a challenging role with great potential for growth, we want to hear from you! Apply now and become part of a dedicated team in a fast-paced environment.
Data Center Engineer/Technician vacancy for our Zurich based client in the Banking sector . Your tasks: Installing Servers, network Switches, storage devices, and other data center hardware according to project specifications and client requirements Planning, installing, and managing data center cabling, including fiber optic, copper, and power cabling, and organizing infrastructure layouts Troubleshooting and repairing hardware and connectivity issues to minimize downtime and ensure reliable operations Integrating new hardware into the existing data center environment and managing data center interconnects, in collaboration with network, security, and system administration teams Maintaining detailed documentation of installations, configurations, and hardware inventory using data center management tools Providing technical support to clients and internal teams, conducting end-to-end tests for connectivity issues, and ensuring compliance with safety regulations and industry standards Your experience/knowledge: 3+ years of experience in data center installation and maintenance, along with a strong knowledge of server hardware, storage solutions, and networking equipment Proficiency in cable management, including fiber optics and structured cabling Familiarity with data center infrastructure management, as well as basic understanding of power distribution units, uninterruptible power supplies, and cooling systems Industry certifications such as CompTIA Server+ or CISCO CCNA are advantageous University degree in Computer Science, Information Technology, Electrical Engineering, or a related field, or equivalent experience with an apprenticeship in Telematics or Electrical fields Language skills: English - fluent Your soft skills: Ability to work effectively in a team-oriented environment Excellent comprehension skills with attention to detail Location: Zurich, Switzerland Work setting: Hybrid Sector: Banking Start: 2024 Duration: 11 months Workload: 100% Ref .Nr.: BH 22069 Take the next step and send us your resume along with a daytime phone number where we can reach you. Due to Swiss work permit restrictions, we can only consider applications from Swiss nationals, EU citizens as well as current work-permit holders for Switzerland. Ukrainian refugees are warmly welcomed, we will support you all the way. We welcome applications from individuals of all genders, age groups, sexual orientations, personal expressions, ethnic backgrounds, and religious beliefs. Therefore, there is no requirement to provide gender information or a photo in your application. As per client requirements, we need information about your marital status, nationality, date of birth, and a valid Swiss work permit. For applicants with disabilities, we are happy to explore potential solutions with our end client.
12/09/2024
Contractor
Data Center Engineer/Technician vacancy for our Zurich based client in the Banking sector . Your tasks: Installing Servers, network Switches, storage devices, and other data center hardware according to project specifications and client requirements Planning, installing, and managing data center cabling, including fiber optic, copper, and power cabling, and organizing infrastructure layouts Troubleshooting and repairing hardware and connectivity issues to minimize downtime and ensure reliable operations Integrating new hardware into the existing data center environment and managing data center interconnects, in collaboration with network, security, and system administration teams Maintaining detailed documentation of installations, configurations, and hardware inventory using data center management tools Providing technical support to clients and internal teams, conducting end-to-end tests for connectivity issues, and ensuring compliance with safety regulations and industry standards Your experience/knowledge: 3+ years of experience in data center installation and maintenance, along with a strong knowledge of server hardware, storage solutions, and networking equipment Proficiency in cable management, including fiber optics and structured cabling Familiarity with data center infrastructure management, as well as basic understanding of power distribution units, uninterruptible power supplies, and cooling systems Industry certifications such as CompTIA Server+ or CISCO CCNA are advantageous University degree in Computer Science, Information Technology, Electrical Engineering, or a related field, or equivalent experience with an apprenticeship in Telematics or Electrical fields Language skills: English - fluent Your soft skills: Ability to work effectively in a team-oriented environment Excellent comprehension skills with attention to detail Location: Zurich, Switzerland Work setting: Hybrid Sector: Banking Start: 2024 Duration: 11 months Workload: 100% Ref .Nr.: BH 22069 Take the next step and send us your resume along with a daytime phone number where we can reach you. Due to Swiss work permit restrictions, we can only consider applications from Swiss nationals, EU citizens as well as current work-permit holders for Switzerland. Ukrainian refugees are warmly welcomed, we will support you all the way. We welcome applications from individuals of all genders, age groups, sexual orientations, personal expressions, ethnic backgrounds, and religious beliefs. Therefore, there is no requirement to provide gender information or a photo in your application. As per client requirements, we need information about your marital status, nationality, date of birth, and a valid Swiss work permit. For applicants with disabilities, we are happy to explore potential solutions with our end client.
Field Engineer (Diesel and Solar Generators) Rugby (with travel across the Midlands region) £29,000 to £33,000 per year (plus a company vehicle) Hours of Working - Monday to Friday, 7.30am to 4.00pm The Opportunity: Our client is looking for a field engineer to undertake maintenance and servicing activities of their range of off grid solar & diesel power generators. This is a fantastic opportunity for someone with knowledge of diesel generators or engines to utilise their existing knowledge while gaining exposure to sustainable technologies and electrical systems. You will travel to customer premises across the Midlands for reactive and preventative maintenance, as well as doing repairs and upgrades at the company workshop. Skills and Experience: Diesel engine & single-phase generator/inverter experience. City & Guilds/NVQ Level 3 in mechanical/auto electrical engineering qualification would be beneficial Proficient in problem-solving and decision-making Able to pass basic security checks to access sensitive sites Full UK drivers licence Please contact James here at ISR to learn more about our sector-leading client and their new opportunities to join their expanding team?
11/09/2024
Full time
Field Engineer (Diesel and Solar Generators) Rugby (with travel across the Midlands region) £29,000 to £33,000 per year (plus a company vehicle) Hours of Working - Monday to Friday, 7.30am to 4.00pm The Opportunity: Our client is looking for a field engineer to undertake maintenance and servicing activities of their range of off grid solar & diesel power generators. This is a fantastic opportunity for someone with knowledge of diesel generators or engines to utilise their existing knowledge while gaining exposure to sustainable technologies and electrical systems. You will travel to customer premises across the Midlands for reactive and preventative maintenance, as well as doing repairs and upgrades at the company workshop. Skills and Experience: Diesel engine & single-phase generator/inverter experience. City & Guilds/NVQ Level 3 in mechanical/auto electrical engineering qualification would be beneficial Proficient in problem-solving and decision-making Able to pass basic security checks to access sensitive sites Full UK drivers licence Please contact James here at ISR to learn more about our sector-leading client and their new opportunities to join their expanding team?