Job title: Production Operative Location: Sony UK Technology Centre, Pencoed, CF35 5HZ Rate: £12.26/hr + shift allowance Contract role Shift Pattern:6.30 AM to 6.30 PM - Week 1-3 days6.30 PM to 6.30 AM - Week 2-3 days6.30 AM to 6.30 PM - Week 3-4 days Your new companyWe are recruiting a few temporary Production/Manufacturing Operatives to work at Sony UK Technology Centre in Pencoed. You will be working for the Sony UK Technology Centre in Pencoed, Bridgend. Key Responsibilities: Quality Checking Work Assembling units and parts Unpacking and arranging parts/items Boxing items ready to be sent to customers Generic duties associated with manufacturing process Experience needed: Strong work ethic Strong Team Player Experience in manufacturing/production - desirable. Start Date:ASAP What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
30/06/2025
Contractor
Job title: Production Operative Location: Sony UK Technology Centre, Pencoed, CF35 5HZ Rate: £12.26/hr + shift allowance Contract role Shift Pattern:6.30 AM to 6.30 PM - Week 1-3 days6.30 PM to 6.30 AM - Week 2-3 days6.30 AM to 6.30 PM - Week 3-4 days Your new companyWe are recruiting a few temporary Production/Manufacturing Operatives to work at Sony UK Technology Centre in Pencoed. You will be working for the Sony UK Technology Centre in Pencoed, Bridgend. Key Responsibilities: Quality Checking Work Assembling units and parts Unpacking and arranging parts/items Boxing items ready to be sent to customers Generic duties associated with manufacturing process Experience needed: Strong work ethic Strong Team Player Experience in manufacturing/production - desirable. Start Date:ASAP What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Senior Stress Engineer for a full time role based in Switzerland. French is a Must for this role. Must have expererience as Stress Engineer in Advanced Mechanical Structures aeronautical or aerospace industries. Your Role: As part of cutting-edge projects in the space sector, you will play a key role in the structural justification and optimization of components operating in extreme environments Your Profile: Master's degree in Mechanical or Aerospace Engineering (or equivalent). At least 10 years of professional experience in a similar position within the space or a closely related industry. Strong command of FEM tools, especially Nastran (mandatory); experience with FEMAP is a plus. In-depth understanding of mechanical behavior of metallic and fiber-reinforced composite materials . Proven experience in managing dynamic test campaigns (eg vibration, shock). Familiarity with ECSS standards . Fluent in both French and English (written and spoken), with the ability to clearly defend and communicate your technical choices. You are autonomous, well-organized, analytical, and assertive in technical discussions. Main responsibilities: Analyze customer requirements based on technical specifications. Perform structural analyses and sizing under static, dynamic, and thermal loads. Carry out mechanical simulations including: static, modal, frequency response, shock, vibro-acoustic, and thermoelastic analyses. Write technical reports and documentation throughout the project life cycle, including during vibration testing phases. Participate in static and dynamic testing campaigns and ensure accurate correlation between FEM models and test results. Take part in technical meetings with project teams and clients Sounds like your profile ? Please apply!
30/06/2025
Full time
Senior Stress Engineer for a full time role based in Switzerland. French is a Must for this role. Must have expererience as Stress Engineer in Advanced Mechanical Structures aeronautical or aerospace industries. Your Role: As part of cutting-edge projects in the space sector, you will play a key role in the structural justification and optimization of components operating in extreme environments Your Profile: Master's degree in Mechanical or Aerospace Engineering (or equivalent). At least 10 years of professional experience in a similar position within the space or a closely related industry. Strong command of FEM tools, especially Nastran (mandatory); experience with FEMAP is a plus. In-depth understanding of mechanical behavior of metallic and fiber-reinforced composite materials . Proven experience in managing dynamic test campaigns (eg vibration, shock). Familiarity with ECSS standards . Fluent in both French and English (written and spoken), with the ability to clearly defend and communicate your technical choices. You are autonomous, well-organized, analytical, and assertive in technical discussions. Main responsibilities: Analyze customer requirements based on technical specifications. Perform structural analyses and sizing under static, dynamic, and thermal loads. Carry out mechanical simulations including: static, modal, frequency response, shock, vibro-acoustic, and thermoelastic analyses. Write technical reports and documentation throughout the project life cycle, including during vibration testing phases. Participate in static and dynamic testing campaigns and ensure accurate correlation between FEM models and test results. Take part in technical meetings with project teams and clients Sounds like your profile ? Please apply!
Senior Development Engineer - Shrewsbury Job Description: An exciting opportunity has arisen for a Senior Development Engineer to join a leading organization within the Defense Engineering sector, based in Shrewsbury, UK. This role is central to the verification and validation of powertrain products, primarily supporting defense land systems. What You Will Do: Support to planning (resource profiling and costing of verification and validation) engineering programs. Creating detailed test plans (DVP&R) to validate complex components/assemblies Run rig/dyno tests on components/assemblies and produce technical reports covering findings. Conduct complex data analysis on test results using hand calculations and/or relevant simulation software as needed. Engage in stakeholder reviews, presenting to colleagues of all levels across engineering and other associated departments. Provide guidance and direction to less experienced engineers as needed within the team. Communicate complex technical information to customers, team members, suppliers and other business units as needed. What You Will Bring: An accredited engineering degree (2:2 or above) or equivalent experience . Proven experience in a development engineer role, ideally with engine, transmission, or driveline development experience . Experience in product testing of either components or complete assemblies. Extensive troubleshooting experience on complex products or systems. Excellent communications skills and the ability to build effective relationships. Proven ability to deliver work to clearly defined plans within tight timescales. A Willingness to travel to both customer and supplier locations as needed. Job Title: Development Engineer Location: Shrewsbury, UK Job Type: Permanent Trading as Aerotek. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. Aerotek and Actalent Services are companies within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Actalent Services, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to the website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
30/06/2025
Full time
Senior Development Engineer - Shrewsbury Job Description: An exciting opportunity has arisen for a Senior Development Engineer to join a leading organization within the Defense Engineering sector, based in Shrewsbury, UK. This role is central to the verification and validation of powertrain products, primarily supporting defense land systems. What You Will Do: Support to planning (resource profiling and costing of verification and validation) engineering programs. Creating detailed test plans (DVP&R) to validate complex components/assemblies Run rig/dyno tests on components/assemblies and produce technical reports covering findings. Conduct complex data analysis on test results using hand calculations and/or relevant simulation software as needed. Engage in stakeholder reviews, presenting to colleagues of all levels across engineering and other associated departments. Provide guidance and direction to less experienced engineers as needed within the team. Communicate complex technical information to customers, team members, suppliers and other business units as needed. What You Will Bring: An accredited engineering degree (2:2 or above) or equivalent experience . Proven experience in a development engineer role, ideally with engine, transmission, or driveline development experience . Experience in product testing of either components or complete assemblies. Extensive troubleshooting experience on complex products or systems. Excellent communications skills and the ability to build effective relationships. Proven ability to deliver work to clearly defined plans within tight timescales. A Willingness to travel to both customer and supplier locations as needed. Job Title: Development Engineer Location: Shrewsbury, UK Job Type: Permanent Trading as Aerotek. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. Aerotek and Actalent Services are companies within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Actalent Services, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to the website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
Seeking a talented Electrical Engineer to join a clean-tech innovator, located in Paris, Île-de-France. You will be responsible for diagnosing and supporting the integration of electrical systems in vehicles or equipment. You will work closely with service teams to resolve technical issues and with engineering teams to report field defects and implement improvements. Their role includes participating in system testing, ensuring architectural coherence, analysing feedback for optimization, and contributing to R&D projects. They also manage documentation and regularly report progress, all while operating in a dynamic, flexible, and collaborative work environment. Key Responsibilities: Degree in Electrical Engineering or equivalent 3-5 years' experience in electrical system integration (automotive or similar) Strong knowledge of on-board electronics and communication protocols (CAN, LIN, Ethernet) Field experience in diagnostics, service, or validation Fluent in French or English Job Title: Electrical Engineer Location: Paris, France Job Type: Contract Trading as Aerotek. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. Aerotek and Actalent Services are companies within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Actalent Services, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to the website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
30/06/2025
Contractor
Seeking a talented Electrical Engineer to join a clean-tech innovator, located in Paris, Île-de-France. You will be responsible for diagnosing and supporting the integration of electrical systems in vehicles or equipment. You will work closely with service teams to resolve technical issues and with engineering teams to report field defects and implement improvements. Their role includes participating in system testing, ensuring architectural coherence, analysing feedback for optimization, and contributing to R&D projects. They also manage documentation and regularly report progress, all while operating in a dynamic, flexible, and collaborative work environment. Key Responsibilities: Degree in Electrical Engineering or equivalent 3-5 years' experience in electrical system integration (automotive or similar) Strong knowledge of on-board electronics and communication protocols (CAN, LIN, Ethernet) Field experience in diagnostics, service, or validation Fluent in French or English Job Title: Electrical Engineer Location: Paris, France Job Type: Contract Trading as Aerotek. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. Aerotek and Actalent Services are companies within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Actalent Services, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to the website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
*Electronics Production Technician - 3 month contract - outside IR35 - £300 per day - Full time onsite in Guildford* Please note - due to the nature of work you must already hold an active SC clearance. We are a successful and growing technology business, currently seeking to recruit an Electronics production engineer. The role includes programming and testing PCBs and systems incorporating FPGAs, micro-controllers, high speed digital interfaces and analogue circuitry. All work will be carried out in the ESD safe lab and workshop based in Guildford. What you will be doing: Program and test PCBs and systems using in house software; Complete assembly and test documentation; Support electronic assembly including box build and cable harnesses; Collaborate with development engineers delivering on technical tasks; Work in an ESD (Electronic Static Discharge) safe environment (foot straps and wrist straps provided); Checking in/out goods from our stores; Other tasks to support the build, as required Requirements: HND, HNC or OND in Electronics/Engineering; Experience in programming and testing electronic systems using standard workshop tools is essential; Able to work independently Friendly and approachable Punctual and good time management Familiarity with Microsoft Office (Outlook, Excel, Word) Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
30/06/2025
Contractor
*Electronics Production Technician - 3 month contract - outside IR35 - £300 per day - Full time onsite in Guildford* Please note - due to the nature of work you must already hold an active SC clearance. We are a successful and growing technology business, currently seeking to recruit an Electronics production engineer. The role includes programming and testing PCBs and systems incorporating FPGAs, micro-controllers, high speed digital interfaces and analogue circuitry. All work will be carried out in the ESD safe lab and workshop based in Guildford. What you will be doing: Program and test PCBs and systems using in house software; Complete assembly and test documentation; Support electronic assembly including box build and cable harnesses; Collaborate with development engineers delivering on technical tasks; Work in an ESD (Electronic Static Discharge) safe environment (foot straps and wrist straps provided); Checking in/out goods from our stores; Other tasks to support the build, as required Requirements: HND, HNC or OND in Electronics/Engineering; Experience in programming and testing electronic systems using standard workshop tools is essential; Able to work independently Friendly and approachable Punctual and good time management Familiarity with Microsoft Office (Outlook, Excel, Word) Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
Senior Engineer - Water Waste/Treatment Design Specialist Opportunity Interim Outside IR35 6 month contract - fully remote working Our client is seeking an experienced and innovative Senior Engineer with extensive experience in waste water and/or water treatment design. This is a contract position offering you the opportunity to contribute your expertise towards impactful projects. With a focus on the drinks industry, you will play a pivotal role in delivering advanced solutions within this vital sector. Key Skills Required Extensive Waste water Design Expertise: Proven ability to lead and deliver comprehensive water treatment and waste water solutions. Experience in the Drinks/Liquid filling Industry: Familiarity with the specific challenges and requirements of water use within this sector. Experience working with project teams over seas is also desirable. The offer is as follows: - 6 month initial contract - Outside of IR35 - full remote working - 5 days per week - Daily rate negotiable - Start date as soon as possible; interviews on the 1st of July with immediate start ideally. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Real, please visit our website Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
30/06/2025
Contractor
Senior Engineer - Water Waste/Treatment Design Specialist Opportunity Interim Outside IR35 6 month contract - fully remote working Our client is seeking an experienced and innovative Senior Engineer with extensive experience in waste water and/or water treatment design. This is a contract position offering you the opportunity to contribute your expertise towards impactful projects. With a focus on the drinks industry, you will play a pivotal role in delivering advanced solutions within this vital sector. Key Skills Required Extensive Waste water Design Expertise: Proven ability to lead and deliver comprehensive water treatment and waste water solutions. Experience in the Drinks/Liquid filling Industry: Familiarity with the specific challenges and requirements of water use within this sector. Experience working with project teams over seas is also desirable. The offer is as follows: - 6 month initial contract - Outside of IR35 - full remote working - 5 days per week - Daily rate negotiable - Start date as soon as possible; interviews on the 1st of July with immediate start ideally. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Real, please visit our website Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC387148 England and Wales
Senior Quality Engineer Based in Watford (WD24 4WW) £51,000 - £55,000 + Car/Car Allowance Full-time | Hybrid - Site travel across UK up to 2 days/week and head office in Watford An exciting opportunity has arisen for a Senior Quality Engineer to join a growing team delivering critical infrastructure projects across the UK. This Watford-based role offers a chance to play a key part in shaping quality assurance and control across multiple sites, supporting project success from the ground up. You'll work closely with internal teams, subcontractors, and clients to drive a strong quality culture and ensure standards are met and exceeded. Key Responsibilities: Collect, monitor and report quality data (including NCRs and performance trends) Champion quality standards and help embed a quality-first culture Support the digital delivery of quality systems Assist in developing and delivering quality training across the business Contribute to internal communications around quality initiatives Help manage and deliver the internal audit programme Provide interim quality support where required Participate in investigations and root cause analysis for quality issues What You'll Need: Strong experience in quality management on large-scale infrastructure or construction projects Excellent knowledge of quality performance monitoring and compliance A relevant qualification in construction, engineering or quality management Chartered status or working towards chartership with CQI (or similar body) Flexibility to travel to project sites across the UK (up to 2 days/week) This is a fantastic opportunity to make a meaningful impact on nationally significant projects, working in a supportive, professional environment with a clear path for progression. Apply now to take the next step in your quality engineering career. ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
27/06/2025
Full time
Senior Quality Engineer Based in Watford (WD24 4WW) £51,000 - £55,000 + Car/Car Allowance Full-time | Hybrid - Site travel across UK up to 2 days/week and head office in Watford An exciting opportunity has arisen for a Senior Quality Engineer to join a growing team delivering critical infrastructure projects across the UK. This Watford-based role offers a chance to play a key part in shaping quality assurance and control across multiple sites, supporting project success from the ground up. You'll work closely with internal teams, subcontractors, and clients to drive a strong quality culture and ensure standards are met and exceeded. Key Responsibilities: Collect, monitor and report quality data (including NCRs and performance trends) Champion quality standards and help embed a quality-first culture Support the digital delivery of quality systems Assist in developing and delivering quality training across the business Contribute to internal communications around quality initiatives Help manage and deliver the internal audit programme Provide interim quality support where required Participate in investigations and root cause analysis for quality issues What You'll Need: Strong experience in quality management on large-scale infrastructure or construction projects Excellent knowledge of quality performance monitoring and compliance A relevant qualification in construction, engineering or quality management Chartered status or working towards chartership with CQI (or similar body) Flexibility to travel to project sites across the UK (up to 2 days/week) This is a fantastic opportunity to make a meaningful impact on nationally significant projects, working in a supportive, professional environment with a clear path for progression. Apply now to take the next step in your quality engineering career. ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
Technical and Aircrew Ground Instructor for Avionic B2 Location: Stans, Switzerland Language: German Fly with us into the future and become part of the team at one of the most innovative aircraft manufacturers in the world. Tasks: Preparing and teaching theoretical and practical instructions for aircraft maintenance personal, pilots (Ground theory) and specialists according EASA Part 147/66 and EASA Part FCL rules and regulations Preparing and teaching technical training for Pilatus internal personal Define and update customer specific course documentations including exams for our customers Definition, production, implementation and update of technical teaching material Side tasks related to training environment, such as eg update of hands on parts, software/hardware With this you convince us: Licensed Aircraft Avionic (B2) engineer At least 3 years of experience as aircraft avionic engineer or as technical instructor Pedagogical and didactical basic skills, as well as pleasure at teaching PPL or CPL permit will be an advantage German minimum Level C1 and English minimum Level B2 Readiness for irregular travel globally for training courses What we offer: A committed, international team and unique projects Flexible working hours and individual pension solutions Support for training and opportunities for personal and professional development Discounted meals in our staff restaurant and various discounts for employees Team events at which we celebrate our successes together Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
27/06/2025
Full time
Technical and Aircrew Ground Instructor for Avionic B2 Location: Stans, Switzerland Language: German Fly with us into the future and become part of the team at one of the most innovative aircraft manufacturers in the world. Tasks: Preparing and teaching theoretical and practical instructions for aircraft maintenance personal, pilots (Ground theory) and specialists according EASA Part 147/66 and EASA Part FCL rules and regulations Preparing and teaching technical training for Pilatus internal personal Define and update customer specific course documentations including exams for our customers Definition, production, implementation and update of technical teaching material Side tasks related to training environment, such as eg update of hands on parts, software/hardware With this you convince us: Licensed Aircraft Avionic (B2) engineer At least 3 years of experience as aircraft avionic engineer or as technical instructor Pedagogical and didactical basic skills, as well as pleasure at teaching PPL or CPL permit will be an advantage German minimum Level C1 and English minimum Level B2 Readiness for irregular travel globally for training courses What we offer: A committed, international team and unique projects Flexible working hours and individual pension solutions Support for training and opportunities for personal and professional development Discounted meals in our staff restaurant and various discounts for employees Team events at which we celebrate our successes together Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
BESS Design Engineer - Energy Storage Projects (Sheffield Based) A leading energy solutions provider is looking for a BESS Design Engineer to join its expanding team in Sheffield , supporting the design and development of Battery Energy Storage System (BESS) projects across the UK and internationally. This is a great opportunity to work on forward-thinking clean energy projects and contribute to the energy transition in a collaborative and supportive environment. You will be involved in the full technical life cycle of BESS installations, from early feasibility and concept development through to construction and commissioning support. Key Responsibilities: Design and review BESS systems, including single-line diagrams (SLDs), layout drawings, and equipment specifications Support feasibility studies and concept designs for grid-connected and hybrid energy projects Collaborate with control systems engineers to ensure well-integrated system solutions Prepare and review technical documentation, including employer's requirements and specifications Evaluate technology options including inverters, battery racks, HVAC systems, and fire protection equipment Assist in tender reviews and contractor design evaluations Support construction and commissioning with site visits, RFI responses, and review of as-built documentation The Ideal Candidate Will Have One or More of the Following: A degree, HND, or HNC in Electrical Engineering, Power Systems, Renewable Energy, or a related field Experience working on BESS or hybrid renewable projects such as solar plus storage A strong understanding of BESS technology or familiarity with key components like PCS, BMS, EMS, HVAC, or containerised systems Hands-on experience in electrical design or engineering, ideally with power systems or controls A passion for energy storage, clean energy, or power systems Proficiency in design tools such as AutoCAD, ETAP, or Trimble Awareness of UK grid codes or DNO connection standards is beneficial Excellent analytical, problem-solving, and communication skills Attention to detail and a desire to grow within a multi-disciplinary engineering team Location: Sheffield (flexible or hybrid working arrangements available) If you have experience or interest in electrical engineering and are eager to contribute to the future of energy storage, we welcome your application. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
27/06/2025
Full time
BESS Design Engineer - Energy Storage Projects (Sheffield Based) A leading energy solutions provider is looking for a BESS Design Engineer to join its expanding team in Sheffield , supporting the design and development of Battery Energy Storage System (BESS) projects across the UK and internationally. This is a great opportunity to work on forward-thinking clean energy projects and contribute to the energy transition in a collaborative and supportive environment. You will be involved in the full technical life cycle of BESS installations, from early feasibility and concept development through to construction and commissioning support. Key Responsibilities: Design and review BESS systems, including single-line diagrams (SLDs), layout drawings, and equipment specifications Support feasibility studies and concept designs for grid-connected and hybrid energy projects Collaborate with control systems engineers to ensure well-integrated system solutions Prepare and review technical documentation, including employer's requirements and specifications Evaluate technology options including inverters, battery racks, HVAC systems, and fire protection equipment Assist in tender reviews and contractor design evaluations Support construction and commissioning with site visits, RFI responses, and review of as-built documentation The Ideal Candidate Will Have One or More of the Following: A degree, HND, or HNC in Electrical Engineering, Power Systems, Renewable Energy, or a related field Experience working on BESS or hybrid renewable projects such as solar plus storage A strong understanding of BESS technology or familiarity with key components like PCS, BMS, EMS, HVAC, or containerised systems Hands-on experience in electrical design or engineering, ideally with power systems or controls A passion for energy storage, clean energy, or power systems Proficiency in design tools such as AutoCAD, ETAP, or Trimble Awareness of UK grid codes or DNO connection standards is beneficial Excellent analytical, problem-solving, and communication skills Attention to detail and a desire to grow within a multi-disciplinary engineering team Location: Sheffield (flexible or hybrid working arrangements available) If you have experience or interest in electrical engineering and are eager to contribute to the future of energy storage, we welcome your application. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Mechanical Design Engineer - Sustainable Product Innovation | Hybrid - £40-45,000 Mechanical Design Engineer wanted to join a pioneering organisation dedicated to reducing environment impact through innovative, low-carbon product design. The Mechanical Engineer will contribute to the creation of new product features, customising designs for key projects, and improving the sustainability of existing solutions. This is a hands-on role where you'll support the full product life cycle - from early concept and CAD development to testing, installations, and post-production improvements. You'll work closely with local engineering, operations, procurement, and business development teams, while also collaborating with colleagues across Europe. The role involves occasional travel to testing facilities, construction sites, and other regional locations to support prototyping, installations and supplier engagement. Key Requirements: Degree in mechanical, structural, civil or product design engineering 2-5 years' experience in mechanical or product design roles Experienced with Windchill Strong CAD skills - ideally using PTC CREO Understanding of sustainable design and low-carbon materials Ability to run basic FEA simulations and develop test-ready designs Experience supporting product testing and installation Strong documentation and drawing management skills Comfortable working with cross-functional teams and external suppliers Willingness to travel to support projects in different regions Salary : £40-45,000 per annum Location : London (3x a week onsite)
26/06/2025
Full time
Mechanical Design Engineer - Sustainable Product Innovation | Hybrid - £40-45,000 Mechanical Design Engineer wanted to join a pioneering organisation dedicated to reducing environment impact through innovative, low-carbon product design. The Mechanical Engineer will contribute to the creation of new product features, customising designs for key projects, and improving the sustainability of existing solutions. This is a hands-on role where you'll support the full product life cycle - from early concept and CAD development to testing, installations, and post-production improvements. You'll work closely with local engineering, operations, procurement, and business development teams, while also collaborating with colleagues across Europe. The role involves occasional travel to testing facilities, construction sites, and other regional locations to support prototyping, installations and supplier engagement. Key Requirements: Degree in mechanical, structural, civil or product design engineering 2-5 years' experience in mechanical or product design roles Experienced with Windchill Strong CAD skills - ideally using PTC CREO Understanding of sustainable design and low-carbon materials Ability to run basic FEA simulations and develop test-ready designs Experience supporting product testing and installation Strong documentation and drawing management skills Comfortable working with cross-functional teams and external suppliers Willingness to travel to support projects in different regions Salary : £40-45,000 per annum Location : London (3x a week onsite)
Are you an experienced professional in the field of electronic and electrical repairs? A dynamic and forward-thinking Engineering company in Greater Manchester is seeking a skilled Repairs Supervisor to join their innovative team. This role offers a unique blend of hands-on technical work and leadership responsibilities, making it an ideal fit for those looking to advance their career while making a tangible impact. Why This Role Stands Out: - Leadership and Growth: As a Repairs Supervisor, you will manage and guide two direct reports, providing an excellent platform to develop your leadership skills. - Technical Mastery: Engage in diagnosing and repairing electronic and electrical faults, ensuring that each task meets the highest standards of quality and safety. - Comprehensive Involvement: Take ownership of the RMA and Warranty Process, overseeing the entire repair and replacement cycle for returned products. - Continuous Improvement: Contribute to the development of the company by writing and updating operating procedures, including work instructions, repair manuals, and troubleshooting guidelines. Key Responsibilities : - Diagnose and repair electronic and electrical faults in products and interior components. - Conduct initial testing and fault finding of returned assemblies and/or products. - Perform routine maintenance and calibration of electronic equipment. - Ensure all repairs meet quality and safety standards. - Oversee the RMA and Warranty Process, ensuring thorough and efficient handling of returned products. - Write and update operating procedures, repair manuals, and troubleshooting guidelines. Core Skills/Experience Include:- - Proven experience in diagnosing and repairing electronic and electrical faults. - Strong understanding of quality and safety standards in electronic repairs. - Excellent problem-solving skills and attention to detail. - Ability to manage and guide a small team effectively. - Experience in writing and updating technical documentation. - Familiarity with routine maintenance and calibration of electronic equipment - Any experience of management of a small team on a day to day basis.Managed a small team on a day to day basis - Ability to analyse data, summarise key issues and suggest future improvements This role promises a stimulating environment where your expertise will be valued and your professional growth supported. If you are ready to take the next step in your career and contribute to a forward-thinking company, this position is designed for you. Apply now to become a key player in a team that values innovation and excellence. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
26/06/2025
Full time
Are you an experienced professional in the field of electronic and electrical repairs? A dynamic and forward-thinking Engineering company in Greater Manchester is seeking a skilled Repairs Supervisor to join their innovative team. This role offers a unique blend of hands-on technical work and leadership responsibilities, making it an ideal fit for those looking to advance their career while making a tangible impact. Why This Role Stands Out: - Leadership and Growth: As a Repairs Supervisor, you will manage and guide two direct reports, providing an excellent platform to develop your leadership skills. - Technical Mastery: Engage in diagnosing and repairing electronic and electrical faults, ensuring that each task meets the highest standards of quality and safety. - Comprehensive Involvement: Take ownership of the RMA and Warranty Process, overseeing the entire repair and replacement cycle for returned products. - Continuous Improvement: Contribute to the development of the company by writing and updating operating procedures, including work instructions, repair manuals, and troubleshooting guidelines. Key Responsibilities : - Diagnose and repair electronic and electrical faults in products and interior components. - Conduct initial testing and fault finding of returned assemblies and/or products. - Perform routine maintenance and calibration of electronic equipment. - Ensure all repairs meet quality and safety standards. - Oversee the RMA and Warranty Process, ensuring thorough and efficient handling of returned products. - Write and update operating procedures, repair manuals, and troubleshooting guidelines. Core Skills/Experience Include:- - Proven experience in diagnosing and repairing electronic and electrical faults. - Strong understanding of quality and safety standards in electronic repairs. - Excellent problem-solving skills and attention to detail. - Ability to manage and guide a small team effectively. - Experience in writing and updating technical documentation. - Familiarity with routine maintenance and calibration of electronic equipment - Any experience of management of a small team on a day to day basis.Managed a small team on a day to day basis - Ability to analyse data, summarise key issues and suggest future improvements This role promises a stimulating environment where your expertise will be valued and your professional growth supported. If you are ready to take the next step in your career and contribute to a forward-thinking company, this position is designed for you. Apply now to become a key player in a team that values innovation and excellence. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Based in Stevenage preferably (Bolton or Bristol considered) A Cable/Harness Design Engineer is required to work within our growing Interconnects team designing bespoke electrical interconnects/cables suitable for the transmission of power, signal and data within and between subsystems in our products. To do this you will need to interpret sub-system requirements and from these, generate electrical schematics and cable design definitions utilising Zuken E3. The role also demands the candidate provide assistance, guidance, and issue resolution for E3 users and the ability to utilise & integrate Zuken E3 throughout the product development life cycle. Individuals will need to have demonstrable experience in cable/harness design, including: * A minimum 2-5 years' experience in the use of E3.Cable and related products (E3.Formboard/E3.3D Transformer beneficial). * A proven ability to define, deploy, and refine processes and best practices within E3. - including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards. * Proven ability to develop and deliver technical instruction to E3 users. * Thorough understanding of product data management and change management within Windchill or similar. * The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements. * An appreciation of cable assembly production/process engineering. * Experience of PTC CREO Cabling would be beneficial. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
26/06/2025
Contractor
Based in Stevenage preferably (Bolton or Bristol considered) A Cable/Harness Design Engineer is required to work within our growing Interconnects team designing bespoke electrical interconnects/cables suitable for the transmission of power, signal and data within and between subsystems in our products. To do this you will need to interpret sub-system requirements and from these, generate electrical schematics and cable design definitions utilising Zuken E3. The role also demands the candidate provide assistance, guidance, and issue resolution for E3 users and the ability to utilise & integrate Zuken E3 throughout the product development life cycle. Individuals will need to have demonstrable experience in cable/harness design, including: * A minimum 2-5 years' experience in the use of E3.Cable and related products (E3.Formboard/E3.3D Transformer beneficial). * A proven ability to define, deploy, and refine processes and best practices within E3. - including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards. * Proven ability to develop and deliver technical instruction to E3 users. * Thorough understanding of product data management and change management within Windchill or similar. * The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements. * An appreciation of cable assembly production/process engineering. * Experience of PTC CREO Cabling would be beneficial. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
ECS Resource Group Limited
Skelmersdale, Lancashire
Electrical Maintenance Technician Permanent Salary Range: Up to £46,360 including shift allowance Location: Skelmersdale I am working with one of the world's largest and most well-known & respected manufacturing companies with a fantastic reputation globally for innovation and quality. They have an exciting opportunity to join their team in Skelmersdale as Maintenance Technician on a full time, permanent basis Responsibilities Tracking and reporting of process improvement results Improving the overall reliability and performance of plant, personnel and production equipment and processes Ensuring production targets are met, optimising output & minimising defects Providing production line support in line with company goals and objectives Preventive maintenance Equipment breakdown repairs Establishing process conditions In-line quality checks Process monitoring and controlling according to Statistical Process Control (SPC) method Analysing data to fault find and developing prioritised improvement plans for the platform Maintaining and developing the delivery of finished products in line with cost, quality and production schedule requirements Prioritizing and promoting Health and Safety awareness Training and mentoring staff in an approachable and constructive manner Fostering and developing excellent relationships with key business stakeholders Gathering & sharing best practice, both within the business and world class manufacturing sites Experience Required First accomplished technical production support experience. Electrical, mechanical, pneumatic, servo controls PLC fault finding (Omron preferred) Experience of robotics (ABB preferred), including experience of automated assembly production lines Experience of vision systems Ability to read electrical/mechanical drawings Ability to follow SOP's and training processes Ability and willingness to work a night shift if required Qualifications Electrical - 18th Edition ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
26/06/2025
Full time
Electrical Maintenance Technician Permanent Salary Range: Up to £46,360 including shift allowance Location: Skelmersdale I am working with one of the world's largest and most well-known & respected manufacturing companies with a fantastic reputation globally for innovation and quality. They have an exciting opportunity to join their team in Skelmersdale as Maintenance Technician on a full time, permanent basis Responsibilities Tracking and reporting of process improvement results Improving the overall reliability and performance of plant, personnel and production equipment and processes Ensuring production targets are met, optimising output & minimising defects Providing production line support in line with company goals and objectives Preventive maintenance Equipment breakdown repairs Establishing process conditions In-line quality checks Process monitoring and controlling according to Statistical Process Control (SPC) method Analysing data to fault find and developing prioritised improvement plans for the platform Maintaining and developing the delivery of finished products in line with cost, quality and production schedule requirements Prioritizing and promoting Health and Safety awareness Training and mentoring staff in an approachable and constructive manner Fostering and developing excellent relationships with key business stakeholders Gathering & sharing best practice, both within the business and world class manufacturing sites Experience Required First accomplished technical production support experience. Electrical, mechanical, pneumatic, servo controls PLC fault finding (Omron preferred) Experience of robotics (ABB preferred), including experience of automated assembly production lines Experience of vision systems Ability to read electrical/mechanical drawings Ability to follow SOP's and training processes Ability and willingness to work a night shift if required Qualifications Electrical - 18th Edition ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
The Role High Voltage System Validation engineer in UK. The validation engineer needs to be in UK with Class3 license and be an expert on the HV system. Associate should have worked before on PHEV or BEV car and have a very good understanding on the HV system and issue resolution. Your responsibilities: 1. High Voltage Systems Knowledge: Understanding of HV system design for PHEV & BEV, operation, and safety protocols (typically 400V+). 2. Electrical Engineering Principles: Proficiency in electrical and electronics engineering principles, especially related to HV systems. 3. Battery and Power Electronics: Knowledge of battery systems, power electronics, and HV components (eAC, Heater, Inverter, DCDC, Charger AC & DC). 4. System Testing and Validation: Ability to develop and implement test plans for HV components and systems, including validation of performance, reliability, and issue replication. 5. Failure Mode and Effects Analysis (FMEA): Experience with FMEA for identifying potential failures and preventive actions. 6. Data Analysis and Statistical Techniques: Skills in analysing data to identify trends and root causes of issues. 7. Software Tools: Familiarity with tools such as MATLAB, LabVIEW, CANalyzer,INCA, CANoe, and quality management software. 8. Thermal and Mechanical Knowledge: Understanding of thermal management systems for HV components. 9. Safety Standards and Compliance: Knowledge of relevant standards (ISO 26262, IEC 61851, SAE J1772) and safety regulations for HV systems. 10. Diagnostics and Troubleshooting: Strong skills in diagnosing and troubleshooting HV systems and components. Essential skills/knowledge/experience: 1. High Voltage Systems Knowledge: Understanding of HV system design for PHEV & BEV, operation, and safety protocols (typically 400V+). 2. Electrical Engineering Principles: Proficiency in electrical and electronics engineering principles, especially related to HV systems. 3. Battery and Power Electronics: Knowledge of battery systems, power electronics, and HV components (eAC, Heater, Inverter, DCDC, Charger AC & DC). 4. System Testing and Validation: Ability to develop and implement test plans for HV components and systems, including validation of performance, reliability, and issue replication. 5. Failure Mode and Effects Analysis (FMEA): Experience with FMEA for identifying potential failures and preventive actions. 6. Data Analysis and Statistical Techniques: Skills in analysing data to identify trends and root causes of issues. 7. Software Tools: Familiarity with tools such as MATLAB, LabVIEW, CANalyzer,INCA, CANoe, and quality management software. 8. Thermal and Mechanical Knowledge: Understanding of thermal management systems for HV components. 9. Safety Standards and Compliance: Knowledge of relevant standards (ISO 26262, IEC 61851, SAE J1772) and safety regulations for HV systems. 10. Diagnostics and Troubleshooting: Strong skills in diagnosing and troubleshooting HV systems and components. Additional Skills 1. Regulatory Awareness: Awareness of global HV system regulations, particularly if working in an international environment. 2. Risk Management: Experience with risk assessments related to HV components and systems. 3. Adaptability and Learning: Willingness to stay updated with emerging HV technologies and industry best practices. 4. A full UK driving license with less than 6 penalty points, no disqualification, 2 years accident-free record 5. UK Class 3 license for BEV/PHEV Test vehicles testing and validation. Desirable skills/knowledge/experience: 1. Cross-functional Collaboration: Ability to work with engineering, production, and quality teams to drive quality improvements. 2. Communication and Presentation: Strong skills in presenting technical information clearly to various stakeholders. 3. Attention to Detail: High level of attention to detail for identifying potential quality issues.
26/06/2025
Contractor
The Role High Voltage System Validation engineer in UK. The validation engineer needs to be in UK with Class3 license and be an expert on the HV system. Associate should have worked before on PHEV or BEV car and have a very good understanding on the HV system and issue resolution. Your responsibilities: 1. High Voltage Systems Knowledge: Understanding of HV system design for PHEV & BEV, operation, and safety protocols (typically 400V+). 2. Electrical Engineering Principles: Proficiency in electrical and electronics engineering principles, especially related to HV systems. 3. Battery and Power Electronics: Knowledge of battery systems, power electronics, and HV components (eAC, Heater, Inverter, DCDC, Charger AC & DC). 4. System Testing and Validation: Ability to develop and implement test plans for HV components and systems, including validation of performance, reliability, and issue replication. 5. Failure Mode and Effects Analysis (FMEA): Experience with FMEA for identifying potential failures and preventive actions. 6. Data Analysis and Statistical Techniques: Skills in analysing data to identify trends and root causes of issues. 7. Software Tools: Familiarity with tools such as MATLAB, LabVIEW, CANalyzer,INCA, CANoe, and quality management software. 8. Thermal and Mechanical Knowledge: Understanding of thermal management systems for HV components. 9. Safety Standards and Compliance: Knowledge of relevant standards (ISO 26262, IEC 61851, SAE J1772) and safety regulations for HV systems. 10. Diagnostics and Troubleshooting: Strong skills in diagnosing and troubleshooting HV systems and components. Essential skills/knowledge/experience: 1. High Voltage Systems Knowledge: Understanding of HV system design for PHEV & BEV, operation, and safety protocols (typically 400V+). 2. Electrical Engineering Principles: Proficiency in electrical and electronics engineering principles, especially related to HV systems. 3. Battery and Power Electronics: Knowledge of battery systems, power electronics, and HV components (eAC, Heater, Inverter, DCDC, Charger AC & DC). 4. System Testing and Validation: Ability to develop and implement test plans for HV components and systems, including validation of performance, reliability, and issue replication. 5. Failure Mode and Effects Analysis (FMEA): Experience with FMEA for identifying potential failures and preventive actions. 6. Data Analysis and Statistical Techniques: Skills in analysing data to identify trends and root causes of issues. 7. Software Tools: Familiarity with tools such as MATLAB, LabVIEW, CANalyzer,INCA, CANoe, and quality management software. 8. Thermal and Mechanical Knowledge: Understanding of thermal management systems for HV components. 9. Safety Standards and Compliance: Knowledge of relevant standards (ISO 26262, IEC 61851, SAE J1772) and safety regulations for HV systems. 10. Diagnostics and Troubleshooting: Strong skills in diagnosing and troubleshooting HV systems and components. Additional Skills 1. Regulatory Awareness: Awareness of global HV system regulations, particularly if working in an international environment. 2. Risk Management: Experience with risk assessments related to HV components and systems. 3. Adaptability and Learning: Willingness to stay updated with emerging HV technologies and industry best practices. 4. A full UK driving license with less than 6 penalty points, no disqualification, 2 years accident-free record 5. UK Class 3 license for BEV/PHEV Test vehicles testing and validation. Desirable skills/knowledge/experience: 1. Cross-functional Collaboration: Ability to work with engineering, production, and quality teams to drive quality improvements. 2. Communication and Presentation: Strong skills in presenting technical information clearly to various stakeholders. 3. Attention to Detail: High level of attention to detail for identifying potential quality issues.
Exterior Lighting - Function Engineer Hybrid working (Office based in Crewe, UK) Initial 6 month duration - potential to extend Are you ready to shape the future of automotive lighting at one of the world's most iconic luxury car brands? Bentley Motors is seeking a Lighting Function Engineer to lead the development and delivery of cutting-edge exterior lighting functions across hardware, software, and communication interfaces. What You'll Do: Own the end-to-end development of lighting functions, from concept to vehicle integration. Create and maintain Function Descriptions and Requirements Specifications. Develop and manage Function Delivery Plans, including testing and validation. Conduct interface testing and support full system integration. Collaborate with cross-functional teams including Component Owners, Infrastructure Architects, and Integration Teams. Provide release recommendations based on rigorous validation and verification. Who You'll Work With: Function and Component Owners across Electrical Engineering (EE), Electromechanics (EM), and Body Electronics (EK). EE Infrastructure Architects and Integration Teams. What You Bring: Strong experience in ECU software and hardware integration. Deep understanding of vehicle systems and function-based development. Proficiency in requirements management and validation planning. Ability to communicate effectively across technical and non-technical teams. Engineering degree or equivalent; professional membership preferred. German language skills are a plus.
26/06/2025
Contractor
Exterior Lighting - Function Engineer Hybrid working (Office based in Crewe, UK) Initial 6 month duration - potential to extend Are you ready to shape the future of automotive lighting at one of the world's most iconic luxury car brands? Bentley Motors is seeking a Lighting Function Engineer to lead the development and delivery of cutting-edge exterior lighting functions across hardware, software, and communication interfaces. What You'll Do: Own the end-to-end development of lighting functions, from concept to vehicle integration. Create and maintain Function Descriptions and Requirements Specifications. Develop and manage Function Delivery Plans, including testing and validation. Conduct interface testing and support full system integration. Collaborate with cross-functional teams including Component Owners, Infrastructure Architects, and Integration Teams. Provide release recommendations based on rigorous validation and verification. Who You'll Work With: Function and Component Owners across Electrical Engineering (EE), Electromechanics (EM), and Body Electronics (EK). EE Infrastructure Architects and Integration Teams. What You Bring: Strong experience in ECU software and hardware integration. Deep understanding of vehicle systems and function-based development. Proficiency in requirements management and validation planning. Ability to communicate effectively across technical and non-technical teams. Engineering degree or equivalent; professional membership preferred. German language skills are a plus.
Are you ready to elevate your career in electronic design engineering? This is a unique chance to join a dynamic team in Sheffield, where innovation meets a supportive and engaging work environment. Imagine working in a state-of-the-art facility and lab, surrounded by cutting-edge AI technology. This role offers the perfect blend of professional growth and personal fulfilment. With flexible working hours and the option to work from home one day a week, achieving a healthy work-life balance has never been easier. The team is tight-knit, fostering a collaborative atmosphere where after-work activities such as climbing and cycling are common. This is more than just a job; it's a community. With 30 days of annual leave plus Bank Holidays, you'll have ample time to recharge and pursue your passions outside of work. In this role, you will be instrumental in shaping the future of AI technology. As a Senior Electronic Design Engineer, you will work on Gen 1, Gen 2, and the upcoming Gen 3 products. Your expertise will be crucial in liaising with software and mechanical engineers to bring these innovative products to life. Candidates should possess a strong background in electronic design engineering, with experience in AI technology being a significant advantage. Proficiency in working with cross-functional teams and excellent problem-solving skills are essential. A passion for innovation and a commitment to continuous learning will set you apart. Core skills include:- Analogue/Digital Design Schematics PCB Design - design and development of high-complexity PCBs with a focus on functionality and reliability in extreme conditions Altium Design for EMC Define project requirements in partnership with product owners, leveraging industry knowledge and OEM Design for Power (Desirable not required) Firmware C/C++ - (Desirable no required) This role offers not just a position but a Pathway to grow within the company. Your contributions will be recognised, and there will be ample investment in your professional development. If you are ready to take the next step in your career and be part of a team that values innovation, collaboration, and personal growth, this role is the perfect fit. Join a company that not only recognises your talents but also invests in your future. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
25/06/2025
Full time
Are you ready to elevate your career in electronic design engineering? This is a unique chance to join a dynamic team in Sheffield, where innovation meets a supportive and engaging work environment. Imagine working in a state-of-the-art facility and lab, surrounded by cutting-edge AI technology. This role offers the perfect blend of professional growth and personal fulfilment. With flexible working hours and the option to work from home one day a week, achieving a healthy work-life balance has never been easier. The team is tight-knit, fostering a collaborative atmosphere where after-work activities such as climbing and cycling are common. This is more than just a job; it's a community. With 30 days of annual leave plus Bank Holidays, you'll have ample time to recharge and pursue your passions outside of work. In this role, you will be instrumental in shaping the future of AI technology. As a Senior Electronic Design Engineer, you will work on Gen 1, Gen 2, and the upcoming Gen 3 products. Your expertise will be crucial in liaising with software and mechanical engineers to bring these innovative products to life. Candidates should possess a strong background in electronic design engineering, with experience in AI technology being a significant advantage. Proficiency in working with cross-functional teams and excellent problem-solving skills are essential. A passion for innovation and a commitment to continuous learning will set you apart. Core skills include:- Analogue/Digital Design Schematics PCB Design - design and development of high-complexity PCBs with a focus on functionality and reliability in extreme conditions Altium Design for EMC Define project requirements in partnership with product owners, leveraging industry knowledge and OEM Design for Power (Desirable not required) Firmware C/C++ - (Desirable no required) This role offers not just a position but a Pathway to grow within the company. Your contributions will be recognised, and there will be ample investment in your professional development. If you are ready to take the next step in your career and be part of a team that values innovation, collaboration, and personal growth, this role is the perfect fit. Join a company that not only recognises your talents but also invests in your future. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
NPD Senior Electrical Engineer - Peterborough Are you ready to elevate your career and work on groundbreaking projects with a global team of engineers? This role offers an exceptional blend of professional growth, work-life balance, and the chance to shape the future of new product development. Why This Role Stands Out: - Hybrid Working: Enjoy the flexibility of balancing office and remote work. - Early Finish Fridays: Wrap up your week with a half-day, finishing at 12 noon. - Generous Leave: Benefit from 28 days of annual leave plus bank holidays. - Global Collaboration: Engage with a diverse team of engineers from around the world, broadening your professional network and expertise. Key Responsibilities: As a Senior Electrical Engineer in the New Product Development (NPD) team, you will: - Concept Creation: Utilise market and customer data to develop innovative concepts. Participate in Voice of Customer (VOC) exercises to ensure designs meet client needs. - Electrical Design: Lead the creation of electrical designs using advanced analysis tools. Develop detailed electrical drawings, models, and schematics with CAD software. - Product FMEA and Testing: Define, lead, and support Failure Mode and Effects Analysis (FMEA), validation, and testing programmes to ensure product reliability and performance. - System Integration: Ensure products are designed for manufacture (DFM) and meet performance targets. Oversee the integration of systems to ensure seamless operation. - Technical Documentation: Create comprehensive engineering specifications, Bills of Materials (BOMs), test reports, and technical documents to support future product use. - Continuous Improvement: Stay ahead of emerging technologies and identify opportunities for product enhancement, driving innovation and excellence. Skills and Experience Required: - Proven experience in electrical engineering, particularly within new product development. - Proficiency in using CAD software for electrical design. - Experience in Transformers - Strong analytical skills and experience with FMEA and validation testing. - Excellent understanding of system integration and DFM principles. - Ability to create detailed technical documentation and reports. - A proactive approach to identifying and implementing improvements. - Understanding of High, medium and low voltage Circuit design - Highest 4000 Lowest 24volt DC. This role is ideal for an experienced electrical engineer looking to make a significant impact within a dynamic and forward-thinking team. If you are passionate about innovation and eager to contribute to the development of cutting-edge products, this position is your next career milestone. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
25/06/2025
Full time
NPD Senior Electrical Engineer - Peterborough Are you ready to elevate your career and work on groundbreaking projects with a global team of engineers? This role offers an exceptional blend of professional growth, work-life balance, and the chance to shape the future of new product development. Why This Role Stands Out: - Hybrid Working: Enjoy the flexibility of balancing office and remote work. - Early Finish Fridays: Wrap up your week with a half-day, finishing at 12 noon. - Generous Leave: Benefit from 28 days of annual leave plus bank holidays. - Global Collaboration: Engage with a diverse team of engineers from around the world, broadening your professional network and expertise. Key Responsibilities: As a Senior Electrical Engineer in the New Product Development (NPD) team, you will: - Concept Creation: Utilise market and customer data to develop innovative concepts. Participate in Voice of Customer (VOC) exercises to ensure designs meet client needs. - Electrical Design: Lead the creation of electrical designs using advanced analysis tools. Develop detailed electrical drawings, models, and schematics with CAD software. - Product FMEA and Testing: Define, lead, and support Failure Mode and Effects Analysis (FMEA), validation, and testing programmes to ensure product reliability and performance. - System Integration: Ensure products are designed for manufacture (DFM) and meet performance targets. Oversee the integration of systems to ensure seamless operation. - Technical Documentation: Create comprehensive engineering specifications, Bills of Materials (BOMs), test reports, and technical documents to support future product use. - Continuous Improvement: Stay ahead of emerging technologies and identify opportunities for product enhancement, driving innovation and excellence. Skills and Experience Required: - Proven experience in electrical engineering, particularly within new product development. - Proficiency in using CAD software for electrical design. - Experience in Transformers - Strong analytical skills and experience with FMEA and validation testing. - Excellent understanding of system integration and DFM principles. - Ability to create detailed technical documentation and reports. - A proactive approach to identifying and implementing improvements. - Understanding of High, medium and low voltage Circuit design - Highest 4000 Lowest 24volt DC. This role is ideal for an experienced electrical engineer looking to make a significant impact within a dynamic and forward-thinking team. If you are passionate about innovation and eager to contribute to the development of cutting-edge products, this position is your next career milestone. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
We are currently looking on behalf of one of our important clients for a Mechatronics Development Engineer (German Speaking). The role is permanent position based in Aargau Canton & comes with some home office allowance. Your role: Concept, develop, programme & commission mechatronic systems. Advise the design department on risk assessments & the implementation of functional safety. Contribute towards the further development of solutions in drive technology for various motion applications. Ensure documentation of mechatronic systems. Your Skills & Experience: At least 2 years of relevant professional experience in Mechatronics Development Engineering. A very good knowledge of Control & Drive Technology. Experienced with Beckhoff controllers. Ideally experienced in TwinCAT & EPlan Electric. Your Profile: Completed University Degree in the areas of Automation, Mechatronics, Systems Engineering or similar. Open-minded & curious with very good communication skills. Fluent in English (spoken & written) & a good command of German (to at least B2 level) are mandatory requirements.
25/06/2025
Full time
We are currently looking on behalf of one of our important clients for a Mechatronics Development Engineer (German Speaking). The role is permanent position based in Aargau Canton & comes with some home office allowance. Your role: Concept, develop, programme & commission mechatronic systems. Advise the design department on risk assessments & the implementation of functional safety. Contribute towards the further development of solutions in drive technology for various motion applications. Ensure documentation of mechatronic systems. Your Skills & Experience: At least 2 years of relevant professional experience in Mechatronics Development Engineering. A very good knowledge of Control & Drive Technology. Experienced with Beckhoff controllers. Ideally experienced in TwinCAT & EPlan Electric. Your Profile: Completed University Degree in the areas of Automation, Mechatronics, Systems Engineering or similar. Open-minded & curious with very good communication skills. Fluent in English (spoken & written) & a good command of German (to at least B2 level) are mandatory requirements.
Blade Technician - Nordex - Australia Blade technicians are required by one of our clients in Queensland, Australia for Nordex Delta 4K inspections and repairs. The role is looking to start ASAP with a competitive daily rate on offer. You will be responsible for the blade repair and inspections of the turbines, ensuring that all parts are functioning correctly. You must have prior experience working on wind turbines. Requirements: GWOs White card Ideally, Nordex turbine blade experience (not essential) This is an urgent position, so if you'd like to hear more about the project, please apply within. Blade Technician - Nordex - Australia
25/06/2025
Contractor
Blade Technician - Nordex - Australia Blade technicians are required by one of our clients in Queensland, Australia for Nordex Delta 4K inspections and repairs. The role is looking to start ASAP with a competitive daily rate on offer. You will be responsible for the blade repair and inspections of the turbines, ensuring that all parts are functioning correctly. You must have prior experience working on wind turbines. Requirements: GWOs White card Ideally, Nordex turbine blade experience (not essential) This is an urgent position, so if you'd like to hear more about the project, please apply within. Blade Technician - Nordex - Australia
Job Title: SC Cleared Principle V&V Engineer Duration: 6 months with possible extension Location New Malden The V&V Principal engineer will support the planning, conduct and reporting of V&V work packages and activities in order to prove our hardware and software product compliance to their associated requirements. The V&V Principal Engineer will work within multi-disciplined project teams under direction of the project delivery management and V&V leadership to effectively and efficiently deliver the assigned V&V activities. The role is focussed on the Environmental and EMC qualification activities required to physically prove our designs. Where the qualification activities are not prioritised, the role will be applied to general V&V activities. Key Responsibilities Promote best practice for V&V engineering life cycle activities in accordance with Corporate and Industry standards. Conduct V&V activities in compliance with approved management plans, using approved methods, competent personnel, effective delivery systems and processes Lead/Supervise other engineers output as required for scoped work package delivery, E&EMC qualification in particular Responsible for a team of multi disciplined engineers required to plan, conduct and report the necessary IVVTQ activities whose results are to be used as evidence for design qualification. Point of contact for all E&EMC IVVTQA needs/requests from the Project V&V Lead for technical requirements/issues/activities, including changes to current and future demand of resource. Plan and co-ordinate test activities to be conducted at third party UKAS accredited E&EMC test facilities. Ensure quality and timeliness of IVVQ management plans and other documentation such as Test Procedures, VCRI's, Test Reports etc. Project responsibilities Plan, conduct and report task activities to the level of Quality expected by the V&V and Project management, including: Project requirements V&V input, Design Estimate compilation, Compilation, issue and review of management plans, processes and metrics, Project Design & Risk reviews, IADT activities, Reporting task progress to timescale and quality requirements, Fault/Issue investigation, review and reporting Implementation of Project security measures related to V&V activities Reporting to NG Management and Project teams Manage third party UKAS test facilities to successfully complete E&EMC test campaigns General Operational Duties Remain compliant with all applicable Business Management/Command Media Processes and procedures Understand and apply all policies, processes and procedures related to compliance and governance Implement improvement ideas to improve department efficiency & effectiveness Provide support and guidance and to team members Facilitate activities in order to maintain the Health and Safety of staff and visitors as required Facilitate assigned activities in order to maintain the Corporate and contracted Security requirements for the site, media, IT etc. (List X) Person Specification Essential qualifications/experience Degree/HND/HNC or equivalent experience in integrated Systems/Software Engineering or Control Systems engineering Experience of planning and conduct of Verification & Validation/Systems/Software activities within a Systems Engineering life cycle, including integrated system (hardware & software) testing Environmental and EMC qualification experience Reporting test metrics, including test management tool experience Fault diagnostic skills including fault identification and reporting Technical report writing skills to produce documentation to a high standard Self-starter, to assign and execute a variety of project functions efficiently and professionally Proficient user of MS Office applications, Word, Excel etc. Experience in defining test requirements, procedures and test equipment Experience providing either task or line leadership responsibilities Task and technical leadership experience Preferred qualifications/experience Software and hardware testing experience of complex PLC based control systems Test Automation experience V&V/Systems/Software Engineering experience within a Defence or regulated industry Familiar with applicable Defence Standards (eg Def Stan 59-411, ISO 15288, ISO 29119) Familiar with IEC 61508 or similar Functional safety standards Competency/Skill requirements Adept at problem-solving, able to develop solutions to a variety of problems Good attention to detail Organised, adept at workload management and prioritising appropriately to meet deadlines Flexible and responsive to changing priorities Proactive team member, equally self-motivated and able to work autonomously Good interpersonal skills, able to engage effectively with all audiences/stakeholders Proficient user of MS Office Competent in PowerPoint (and face-to-face presentation delivery - if required) Fluent in written and spoken English Good technical English and report writing skills Strong customer focus Engaging 'can do' attitude Other requirements Availability to work shift patterns if required Availability to work weekends if required Travel requirements: Occasional UK travel may be required to attend team/customer technical visits, meetings and training activities Clearance requirements: Post-holder must hold and maintain UK Government clearances where required If this is the role for you please submit your CV at your earliest convenience.
25/06/2025
Contractor
Job Title: SC Cleared Principle V&V Engineer Duration: 6 months with possible extension Location New Malden The V&V Principal engineer will support the planning, conduct and reporting of V&V work packages and activities in order to prove our hardware and software product compliance to their associated requirements. The V&V Principal Engineer will work within multi-disciplined project teams under direction of the project delivery management and V&V leadership to effectively and efficiently deliver the assigned V&V activities. The role is focussed on the Environmental and EMC qualification activities required to physically prove our designs. Where the qualification activities are not prioritised, the role will be applied to general V&V activities. Key Responsibilities Promote best practice for V&V engineering life cycle activities in accordance with Corporate and Industry standards. Conduct V&V activities in compliance with approved management plans, using approved methods, competent personnel, effective delivery systems and processes Lead/Supervise other engineers output as required for scoped work package delivery, E&EMC qualification in particular Responsible for a team of multi disciplined engineers required to plan, conduct and report the necessary IVVTQ activities whose results are to be used as evidence for design qualification. Point of contact for all E&EMC IVVTQA needs/requests from the Project V&V Lead for technical requirements/issues/activities, including changes to current and future demand of resource. Plan and co-ordinate test activities to be conducted at third party UKAS accredited E&EMC test facilities. Ensure quality and timeliness of IVVQ management plans and other documentation such as Test Procedures, VCRI's, Test Reports etc. Project responsibilities Plan, conduct and report task activities to the level of Quality expected by the V&V and Project management, including: Project requirements V&V input, Design Estimate compilation, Compilation, issue and review of management plans, processes and metrics, Project Design & Risk reviews, IADT activities, Reporting task progress to timescale and quality requirements, Fault/Issue investigation, review and reporting Implementation of Project security measures related to V&V activities Reporting to NG Management and Project teams Manage third party UKAS test facilities to successfully complete E&EMC test campaigns General Operational Duties Remain compliant with all applicable Business Management/Command Media Processes and procedures Understand and apply all policies, processes and procedures related to compliance and governance Implement improvement ideas to improve department efficiency & effectiveness Provide support and guidance and to team members Facilitate activities in order to maintain the Health and Safety of staff and visitors as required Facilitate assigned activities in order to maintain the Corporate and contracted Security requirements for the site, media, IT etc. (List X) Person Specification Essential qualifications/experience Degree/HND/HNC or equivalent experience in integrated Systems/Software Engineering or Control Systems engineering Experience of planning and conduct of Verification & Validation/Systems/Software activities within a Systems Engineering life cycle, including integrated system (hardware & software) testing Environmental and EMC qualification experience Reporting test metrics, including test management tool experience Fault diagnostic skills including fault identification and reporting Technical report writing skills to produce documentation to a high standard Self-starter, to assign and execute a variety of project functions efficiently and professionally Proficient user of MS Office applications, Word, Excel etc. Experience in defining test requirements, procedures and test equipment Experience providing either task or line leadership responsibilities Task and technical leadership experience Preferred qualifications/experience Software and hardware testing experience of complex PLC based control systems Test Automation experience V&V/Systems/Software Engineering experience within a Defence or regulated industry Familiar with applicable Defence Standards (eg Def Stan 59-411, ISO 15288, ISO 29119) Familiar with IEC 61508 or similar Functional safety standards Competency/Skill requirements Adept at problem-solving, able to develop solutions to a variety of problems Good attention to detail Organised, adept at workload management and prioritising appropriately to meet deadlines Flexible and responsive to changing priorities Proactive team member, equally self-motivated and able to work autonomously Good interpersonal skills, able to engage effectively with all audiences/stakeholders Proficient user of MS Office Competent in PowerPoint (and face-to-face presentation delivery - if required) Fluent in written and spoken English Good technical English and report writing skills Strong customer focus Engaging 'can do' attitude Other requirements Availability to work shift patterns if required Availability to work weekends if required Travel requirements: Occasional UK travel may be required to attend team/customer technical visits, meetings and training activities Clearance requirements: Post-holder must hold and maintain UK Government clearances where required If this is the role for you please submit your CV at your earliest convenience.
