Product Quality Non-Conformance Engineer is required for a contract assignment based in Bolton Hybrid working pattern: Where possible, we will seek to accommodate a blended approach to on-site and remote working. The opportunity: We are seeking an experienced and highly motivated Quality Engineer to join the Non Conformance team providing support to the Manufacturing teams in the UK. The successful candidate will be responsible for:- * Frontline provision of non-conformance management supporting the Manufacturing functions, including the administration of non-conformities and containment activities * Collation and analysis of non-conformance data through the business tool, Google NLP, highlighting any adverse trends and risks to the business and also opportunities for improvement. * This is to include the implementation and verification of permanent corrective actions * The collation of business KPI's for communication at all levels * Data analysing to include CQN (Rework/Scrap), returns and yields * Facilitating Practical Problem Solving activities, determining Root Causes and the effective implementation of robust Corrective Actions using the relevant Quality Tools * Supporting the successful transfer of new products into manufacturing, analysing historical data and using lessons learnt * Facilitation of non-conformance meetings at all levels from Shop Floor to Manufacturing Heads, providing information concerning products and escalation of issues * Managing Customer concerns and escapes, dealing with Inter Company facilities across Europe including France, Italy and Germany and external customers * Managing inscapes between business units within Manufacturing * Interface with the Programs Quality representative and the wider Quality teams, sharing data packs and progression of non-conformities and improvements What we're looking for from you: * Ideally qualified to minimum HNC/HND in relevant subject or with relevant work experience * Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements * Ability and confidence to report to all levels of the business * Strong Practical Problem Solving skills being able to lead and facilitate activities leading to improvements * Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives * Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
29/04/2024
Contractor
Product Quality Non-Conformance Engineer is required for a contract assignment based in Bolton Hybrid working pattern: Where possible, we will seek to accommodate a blended approach to on-site and remote working. The opportunity: We are seeking an experienced and highly motivated Quality Engineer to join the Non Conformance team providing support to the Manufacturing teams in the UK. The successful candidate will be responsible for:- * Frontline provision of non-conformance management supporting the Manufacturing functions, including the administration of non-conformities and containment activities * Collation and analysis of non-conformance data through the business tool, Google NLP, highlighting any adverse trends and risks to the business and also opportunities for improvement. * This is to include the implementation and verification of permanent corrective actions * The collation of business KPI's for communication at all levels * Data analysing to include CQN (Rework/Scrap), returns and yields * Facilitating Practical Problem Solving activities, determining Root Causes and the effective implementation of robust Corrective Actions using the relevant Quality Tools * Supporting the successful transfer of new products into manufacturing, analysing historical data and using lessons learnt * Facilitation of non-conformance meetings at all levels from Shop Floor to Manufacturing Heads, providing information concerning products and escalation of issues * Managing Customer concerns and escapes, dealing with Inter Company facilities across Europe including France, Italy and Germany and external customers * Managing inscapes between business units within Manufacturing * Interface with the Programs Quality representative and the wider Quality teams, sharing data packs and progression of non-conformities and improvements What we're looking for from you: * Ideally qualified to minimum HNC/HND in relevant subject or with relevant work experience * Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements * Ability and confidence to report to all levels of the business * Strong Practical Problem Solving skills being able to lead and facilitate activities leading to improvements * Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives * Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
A Development and Production Test Engineer - Electronic/Electrical is required for a long term contract assignment on site in Stevenage. Role responsibilities . Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. . Provide Test Engineering support during Design/Development phases from initial concept through to Production Readiness Review and release to Operations. * Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. * Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. . Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme. * Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements. * Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications) * HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. * Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. * Proven analytical and problem solving skills, with strong attention to detail. * The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. * Manual handling training. * ESD training. Medical requirements * None Health surveillance requirements * None Why you should come and work at MBDA * MBDA, a world leader in missiles and missile systems, is a multi-national group with 10,000 employees on industrial facilities in France, Germany, Italy, the United Kingdom and the United States * With some of the most sophisticated technology in defence, MBDA is Europe's leading guided weapons company and with this in mind we continually look to broaden our existing talent base whilst maintaining a strategic edge, by exploiting new markets and new applications for our world-class technology base * Our work is complex, challenging and innovative. It takes a range of professionals across the full engineering and commercial spectrum to carry it out. Whatever field our people specialise in, they all share the same mind-set: a drive to make things work better and to redefine the established standards Please note that in order to apply for MBDA UK opportunities you will need to be eligible for SC (Secret Level) UK Security Clearance HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. Skillset/experience required: Experience plus HNC/HND or equivalent Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
29/04/2024
Contractor
A Development and Production Test Engineer - Electronic/Electrical is required for a long term contract assignment on site in Stevenage. Role responsibilities . Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. . Provide Test Engineering support during Design/Development phases from initial concept through to Production Readiness Review and release to Operations. * Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. * Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. . Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme. * Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements. * Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications) * HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. * Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. * Proven analytical and problem solving skills, with strong attention to detail. * The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. * Manual handling training. * ESD training. Medical requirements * None Health surveillance requirements * None Why you should come and work at MBDA * MBDA, a world leader in missiles and missile systems, is a multi-national group with 10,000 employees on industrial facilities in France, Germany, Italy, the United Kingdom and the United States * With some of the most sophisticated technology in defence, MBDA is Europe's leading guided weapons company and with this in mind we continually look to broaden our existing talent base whilst maintaining a strategic edge, by exploiting new markets and new applications for our world-class technology base * Our work is complex, challenging and innovative. It takes a range of professionals across the full engineering and commercial spectrum to carry it out. Whatever field our people specialise in, they all share the same mind-set: a drive to make things work better and to redefine the established standards Please note that in order to apply for MBDA UK opportunities you will need to be eligible for SC (Secret Level) UK Security Clearance HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. Skillset/experience required: Experience plus HNC/HND or equivalent Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
PLM PROJECT MANAGER (f/m/d): CAx/custom engineering tools/international Matrix organization/Stakeholder Management/Communication skills/English/German/French Project : For our customer based in Zurich we are looking for a highly qualified PLM PROJECT MANAGER (f/m/d). Background : Our Client, headquartered in Zurich, Switzerland, is the first startup to combine agility, speed and innovation with decades of experience and proven quality. Around 1600 employees at 12 locations in six countries (Switzerland, Sweden, Austria, Germany, USA and Finland) develop and manufacture products for satellites and launch vehicles with the goal of advancing humankind and enabling the exploration of the world and beyond. Our Client is the preferred supplier of structures for all types of launch vehicles and a leader in selected satellite products and for constellations in the New Space sector. Our Client also uses its space knowledge for applications outside of space technology: The high-precision products have already been used in the semiconductor industry for more than 20 years. Job description: We have recently launched a major PLM and engineering transformation initiative, taking the company to the next generation, and are looking for the right person to drive the project. A person with key skills in project management and operations of complex PLM projects including system introduction and support as well as being able to drive change - to bring our colleges along on the journey. Focus of your work is change management and the management of the PLM implementation, external partners collaboration, engineering application landscape simplification, related projects, and introduction/consolidation of new/existing processes. The Perfect Candidate: As project manager, you are responsible for the planning, implementation, and documentation of related initiatives. You will guide the project team in the creation of requirements and functional specifications, be responsible for solution design and the implementation. You further ensure that the project targets are achieved within time, budget, and quality. Tasks & Responsibilities: * Partner to business for successful implementation and organization change management * Lead PLM system (Teamcenter) implementation and participate in end-to-end Digital transformation * Define strategies for Data migration, Design data management, BOM management, Change Management, MES, ERP & downstream system integration * Developing architectural blueprints for PLM, CAD, PLM-ERP interfaces & downstream systems * Further optimization of applications landscape for Multi-PLM, MES, M-CAD, E-CAD, FEM systems and future R&D tools * Evaluating business problems, their financial impacts, proposing solutions and driving change for key results * Own decommissioning strategies for PLM/CAD systems * Manage and train the Power User organization and create, review, and validate work instructions and training materials Must Haves: * Min. 7-10 years of working experience in a similar role and proven strengths in PLM and CAx technologies * Operational experience in CAx and custom engineering tools eg Siemens Teamcenter, NX, CATIA, SAP, IFS, Windchill, 3D experience. * Very good functional understanding and usage of various Teamcenter modules like BMIDE, Structure Manager, Workflow Designer, Change Management, BOM Configuration methodologies, Active Workspace, ERP interfaces ( eg T4S), OpsCenter and MES * Ability to work in an international Matrix organization and manage stakeholders and facilitate decision making in an international group organization * Strong communications skills in English; French nice to have Reference Nr. : 923402SDA Role : PLM PROJECT MANAGER (f/m/d) Industrie : Space Research Workplace : Zurich Pensum : 100% Start : ASAP Duration : 3 Deadline : 10.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
29/04/2024
Contractor
PLM PROJECT MANAGER (f/m/d): CAx/custom engineering tools/international Matrix organization/Stakeholder Management/Communication skills/English/German/French Project : For our customer based in Zurich we are looking for a highly qualified PLM PROJECT MANAGER (f/m/d). Background : Our Client, headquartered in Zurich, Switzerland, is the first startup to combine agility, speed and innovation with decades of experience and proven quality. Around 1600 employees at 12 locations in six countries (Switzerland, Sweden, Austria, Germany, USA and Finland) develop and manufacture products for satellites and launch vehicles with the goal of advancing humankind and enabling the exploration of the world and beyond. Our Client is the preferred supplier of structures for all types of launch vehicles and a leader in selected satellite products and for constellations in the New Space sector. Our Client also uses its space knowledge for applications outside of space technology: The high-precision products have already been used in the semiconductor industry for more than 20 years. Job description: We have recently launched a major PLM and engineering transformation initiative, taking the company to the next generation, and are looking for the right person to drive the project. A person with key skills in project management and operations of complex PLM projects including system introduction and support as well as being able to drive change - to bring our colleges along on the journey. Focus of your work is change management and the management of the PLM implementation, external partners collaboration, engineering application landscape simplification, related projects, and introduction/consolidation of new/existing processes. The Perfect Candidate: As project manager, you are responsible for the planning, implementation, and documentation of related initiatives. You will guide the project team in the creation of requirements and functional specifications, be responsible for solution design and the implementation. You further ensure that the project targets are achieved within time, budget, and quality. Tasks & Responsibilities: * Partner to business for successful implementation and organization change management * Lead PLM system (Teamcenter) implementation and participate in end-to-end Digital transformation * Define strategies for Data migration, Design data management, BOM management, Change Management, MES, ERP & downstream system integration * Developing architectural blueprints for PLM, CAD, PLM-ERP interfaces & downstream systems * Further optimization of applications landscape for Multi-PLM, MES, M-CAD, E-CAD, FEM systems and future R&D tools * Evaluating business problems, their financial impacts, proposing solutions and driving change for key results * Own decommissioning strategies for PLM/CAD systems * Manage and train the Power User organization and create, review, and validate work instructions and training materials Must Haves: * Min. 7-10 years of working experience in a similar role and proven strengths in PLM and CAx technologies * Operational experience in CAx and custom engineering tools eg Siemens Teamcenter, NX, CATIA, SAP, IFS, Windchill, 3D experience. * Very good functional understanding and usage of various Teamcenter modules like BMIDE, Structure Manager, Workflow Designer, Change Management, BOM Configuration methodologies, Active Workspace, ERP interfaces ( eg T4S), OpsCenter and MES * Ability to work in an international Matrix organization and manage stakeholders and facilitate decision making in an international group organization * Strong communications skills in English; French nice to have Reference Nr. : 923402SDA Role : PLM PROJECT MANAGER (f/m/d) Industrie : Space Research Workplace : Zurich Pensum : 100% Start : ASAP Duration : 3 Deadline : 10.05.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
29/04/2024
Contractor
ENGINEERING MANAGER Up to £75 per hour Plymouth - Hybrid (2-3 days in office) Discovering unparalleled innovation and expertise with a global leader in engineering and technology solutions, looking for an ENGINEERING MANAGER . You will experience top-tier services designed to elevate your projects and exceed expectations working with them. You will be involved in supporting the Design and Safety Manager with day-to-day engineering decisions. Report directly to the Design and Safety Manager and provide support to them, ensuring the delivery of engineering outcomes and the assurance of technical documentation. Skills Required: Managed up to at least 40 engineers. Knowledge of Design and Nuclear Safety. Mechanical/Electrical/Civil experience. Background in Engineering systems and design. Preferred - extensive knowledge of design codes. Join a trusted industry leader committed to driving progress and success on a global scale. Unlock new possibilities for your ventures with their esteemed team in Defence, Nuclear, Marine, and more. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Project Design Engineer Chippenham Up to £55k Progressive Engineering and a Global Automotive Engineering Company, who work with Global Automotive OEM's, are looking to recruit a Project Design Engineer on a permanent basis for their Engineering HQ in the Chippenham area (Wiltshire), owing to succession planning, project pipeline and business forecast for 2024-27+. Reporting into the Engineering Manager, the Project Design Engineer will be working directly with Mechanical Systems Engineers at Automotive OEM's to design, develop, integrate & package my client's mechanical products onto new & existing Automotive On-Highway Platforms. Acting as the technical interface between Customer and internal Design/CAD, Build & Manufacturing Functions, the Project Design Engineer will be responsible for: Design study schedule, the design study budget and the consistency of the product design in relation to the specifications and customer expectations. Overseeing and validating the product design in compliance with the business rules. May manage one or several projects. Manages the functional analysis and product failure mode analysis (FMEA). Ensures the application of standards. Formalizes the design requirements to our suppliers. Presents internally and externally (customers) the adopted technical solutions. Contributes to maintain and develop the knowledge and expertise within the assigned area of responsibility. Takes an active role in technical meetings, project reviews. Manages plan developments and ensures the follow-up of existing products. For this Project Design Engineer role, my client is looking for a Project Design Engineer with the following Qualifications, Experience & Qualifications: Degree in Mechanical Engineering (or similar - Aerospace Engineering, Motorsport Engineering, Aeronautical Engineering etc) Experience as a Project Engineer within an Automotive Environment and/or for Automotive Applications/Automotive Customers Sound understanding of systems level design and translation down to components Experience working in a customer/client-facing environment Experience using 3D CAD Software (Inventor, Solidworks, ProE, Creo etc) to create concept Engineering Drawings Experience of using CAE Analysis & Simulation/FEA Package AND Hand/Engineering Calculations to validate and prove design concepts Experience & understanding of Engineering process tools (Functional Analysis/Product Failure Mode Analysis/FMEA, DVP&R, DMR etc) Understanding of production methods (injection moulding, aluminium extrusion etc) and material properties (metal, engineered plastic & rubber) Experience of GD&T/Geometric dimensioning and tolerancing/BS8888 For the successful Project Design Engineer, a salary up to £55,000 & package reflective of experience is on offer and this Project Design Engineer role is commutable from Bath, Corsham, Bristol, Lyneham, Royal Wootton Bassett, Trowbridge, Castle Combe, Malmesbury, Tetbury, Keynsham, Swindon, Cirencester, Stroud and Devizes. Some UK & International Travel is required to Customer & Manufacturing Sites for this Project Design Engineer role and my client does offer hybrid working after successful completion of the probation period. To be considered for this Project Design Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
29/04/2024
Full time
Project Design Engineer Chippenham Up to £55k Progressive Engineering and a Global Automotive Engineering Company, who work with Global Automotive OEM's, are looking to recruit a Project Design Engineer on a permanent basis for their Engineering HQ in the Chippenham area (Wiltshire), owing to succession planning, project pipeline and business forecast for 2024-27+. Reporting into the Engineering Manager, the Project Design Engineer will be working directly with Mechanical Systems Engineers at Automotive OEM's to design, develop, integrate & package my client's mechanical products onto new & existing Automotive On-Highway Platforms. Acting as the technical interface between Customer and internal Design/CAD, Build & Manufacturing Functions, the Project Design Engineer will be responsible for: Design study schedule, the design study budget and the consistency of the product design in relation to the specifications and customer expectations. Overseeing and validating the product design in compliance with the business rules. May manage one or several projects. Manages the functional analysis and product failure mode analysis (FMEA). Ensures the application of standards. Formalizes the design requirements to our suppliers. Presents internally and externally (customers) the adopted technical solutions. Contributes to maintain and develop the knowledge and expertise within the assigned area of responsibility. Takes an active role in technical meetings, project reviews. Manages plan developments and ensures the follow-up of existing products. For this Project Design Engineer role, my client is looking for a Project Design Engineer with the following Qualifications, Experience & Qualifications: Degree in Mechanical Engineering (or similar - Aerospace Engineering, Motorsport Engineering, Aeronautical Engineering etc) Experience as a Project Engineer within an Automotive Environment and/or for Automotive Applications/Automotive Customers Sound understanding of systems level design and translation down to components Experience working in a customer/client-facing environment Experience using 3D CAD Software (Inventor, Solidworks, ProE, Creo etc) to create concept Engineering Drawings Experience of using CAE Analysis & Simulation/FEA Package AND Hand/Engineering Calculations to validate and prove design concepts Experience & understanding of Engineering process tools (Functional Analysis/Product Failure Mode Analysis/FMEA, DVP&R, DMR etc) Understanding of production methods (injection moulding, aluminium extrusion etc) and material properties (metal, engineered plastic & rubber) Experience of GD&T/Geometric dimensioning and tolerancing/BS8888 For the successful Project Design Engineer, a salary up to £55,000 & package reflective of experience is on offer and this Project Design Engineer role is commutable from Bath, Corsham, Bristol, Lyneham, Royal Wootton Bassett, Trowbridge, Castle Combe, Malmesbury, Tetbury, Keynsham, Swindon, Cirencester, Stroud and Devizes. Some UK & International Travel is required to Customer & Manufacturing Sites for this Project Design Engineer role and my client does offer hybrid working after successful completion of the probation period. To be considered for this Project Design Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Principal Process Engineer Burton-on-Trent £DoE Progressive GE and an International Engineering Consultancy, specialising in Engineered Process Solutions for the FMCG, Food, Drink & Brewing Industries are looking to recruit a Principal Process Engineer on a Staff/Permanent Basis, owing to business growth, succession planning & project pipeline for 2024-26+. Reporting into an Engineering Manager, the Principal Process Engineer will be the Technical Authority on multi-disciplinary projects to design and construct state-of-the-art facilities through the full life cycle, from initial feasibility studies to engineering design, construction management, and operational optimisation. Specifically, the Principal Process Engineer will be responsible for: Undertake the role of subject matter expert with significant knowledge and experience of process systems and provide engineering guidance to other departments Manage all phases of technical process projects, leading in overseeing the implementation of process equipment and technology Develop commercially focused innovative engineering solutions to solve complex Client problems with responsibility for delivery from initial conception through to final handover Work as an effective member of a multi-disciplined project team leading one or more of the engineering disciplines Commit to delivering project objectives within capital, time, quality, and legislative parameters Assist in the overall development of the Process team, including the mentoring of junior/graduate Engineers Experience & Qualifications Required for Principal Process Engineer Role: Degree educated in a relevant engineering discipline (Chemical/Process Engineering) Prior experience as a Principal Process Engineer/Lead Process Engineer/Senior Process Engineer Prior process system design & project delivery experience within FMCG/Food/Drink/Brewing/Pharmaceutical/Advanced Renewable Technologies Understanding of process analysis techniques (eg HAZOP studies) and process improvement initiatives Strong communication and interpersonal skills Flexibility to travel both in the UK and internationally, as and when required Proficient in the use of MS Office, MS Project and AutoCAD Valid driving licence and vehicle owner For the successful Principal Process Engineer, a salary reflective of experience is on offer + car allowance + package + hybrid/flexible working is on offer. To be considered for this Principal Process Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
29/04/2024
Full time
Principal Process Engineer Burton-on-Trent £DoE Progressive GE and an International Engineering Consultancy, specialising in Engineered Process Solutions for the FMCG, Food, Drink & Brewing Industries are looking to recruit a Principal Process Engineer on a Staff/Permanent Basis, owing to business growth, succession planning & project pipeline for 2024-26+. Reporting into an Engineering Manager, the Principal Process Engineer will be the Technical Authority on multi-disciplinary projects to design and construct state-of-the-art facilities through the full life cycle, from initial feasibility studies to engineering design, construction management, and operational optimisation. Specifically, the Principal Process Engineer will be responsible for: Undertake the role of subject matter expert with significant knowledge and experience of process systems and provide engineering guidance to other departments Manage all phases of technical process projects, leading in overseeing the implementation of process equipment and technology Develop commercially focused innovative engineering solutions to solve complex Client problems with responsibility for delivery from initial conception through to final handover Work as an effective member of a multi-disciplined project team leading one or more of the engineering disciplines Commit to delivering project objectives within capital, time, quality, and legislative parameters Assist in the overall development of the Process team, including the mentoring of junior/graduate Engineers Experience & Qualifications Required for Principal Process Engineer Role: Degree educated in a relevant engineering discipline (Chemical/Process Engineering) Prior experience as a Principal Process Engineer/Lead Process Engineer/Senior Process Engineer Prior process system design & project delivery experience within FMCG/Food/Drink/Brewing/Pharmaceutical/Advanced Renewable Technologies Understanding of process analysis techniques (eg HAZOP studies) and process improvement initiatives Strong communication and interpersonal skills Flexibility to travel both in the UK and internationally, as and when required Proficient in the use of MS Office, MS Project and AutoCAD Valid driving licence and vehicle owner For the successful Principal Process Engineer, a salary reflective of experience is on offer + car allowance + package + hybrid/flexible working is on offer. To be considered for this Principal Process Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
29/04/2024
Full time
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Contractor
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Tiro Partners are looking for a Design Engineer with experience in Gas Turbine Compressors to support a client in the Aerospace industry. This is a contract role, 12 months in length and Outside IR35. The role is paying up to £43.75 per hour DOE. The role is a hybrid setup with 3 days onsite in Derby, 2 days remote. Experience needed includes: Siemens NX Aerospace experience Compressors Certification reports For more information, please apply with an updated copy of your CV or call.
26/04/2024
Contractor
Tiro Partners are looking for a Design Engineer with experience in Gas Turbine Compressors to support a client in the Aerospace industry. This is a contract role, 12 months in length and Outside IR35. The role is paying up to £43.75 per hour DOE. The role is a hybrid setup with 3 days onsite in Derby, 2 days remote. Experience needed includes: Siemens NX Aerospace experience Compressors Certification reports For more information, please apply with an updated copy of your CV or call.
Position Available : Principal Systems Engineer - MBSE Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £57,000 + Company Bonus & Very Good Pension Package Experience needed : Experience with both Systems Engineering and Model Based Systems Engineering is essential for this role. Knowledge of RF systems and data links would be beneficial but is not essential for this role as training can be provided. The ideal candidate would come from a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Principal Systems Engineer who has demonstrable experience in model-based systems engineering to join our team who focus on the creation of the systems behavioural model of a Data Link System within a key product program. This is a rapidly growing team within the business and provides the opportunity to work with a specialist team developing and managing technically challenging technology within the business. What we need from you: Creation and ownership of MBSE behavioural models A strong background in systems engineering across the full product life cycle Requirements definition and management The ability to work autonomously within a multi-skilled team with a good understanding and dedication to achieving project goals Good communication skills with the ability to produce high quality written reports and presentations to internal and external customers Ideally, you will have experience in providing problem assessments, and proposing design solutions within a culture of innovative thinking Desirable, but not essential: Leading design reviews across the product life cycle Technical leadership of junior engineers System level functionality proving If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Principal Systems Engineer - MBSE Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £57,000 + Company Bonus & Very Good Pension Package Experience needed : Experience with both Systems Engineering and Model Based Systems Engineering is essential for this role. Knowledge of RF systems and data links would be beneficial but is not essential for this role as training can be provided. The ideal candidate would come from a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Principal Systems Engineer who has demonstrable experience in model-based systems engineering to join our team who focus on the creation of the systems behavioural model of a Data Link System within a key product program. This is a rapidly growing team within the business and provides the opportunity to work with a specialist team developing and managing technically challenging technology within the business. What we need from you: Creation and ownership of MBSE behavioural models A strong background in systems engineering across the full product life cycle Requirements definition and management The ability to work autonomously within a multi-skilled team with a good understanding and dedication to achieving project goals Good communication skills with the ability to produce high quality written reports and presentations to internal and external customers Ideally, you will have experience in providing problem assessments, and proposing design solutions within a culture of innovative thinking Desirable, but not essential: Leading design reviews across the product life cycle Technical leadership of junior engineers System level functionality proving If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Principal Systems Engineer - MBSE Location : Gloucester (Hybrid) & Dynamic Working Hours Salary : Up to £57,000 + Company Bonus & Very Good Pension Package Experience needed : Experience with both Systems Engineering and Model Based Systems Engineering is essential for this role. Knowledge of RF systems and data links would be beneficial but is not essential for this role as training can be provided. The ideal candidate would come from a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Principal Systems Engineer who has demonstrable experience in model-based systems engineering to join our team who focus on the creation of the systems behavioural model of a Data Link System within a key product program. This is a rapidly growing team within the business and provides the opportunity to work with a specialist team developing and managing technically challenging technology within the business. What we need from you: Creation and ownership of MBSE behavioural models A strong background in systems engineering across the full product life cycle Requirements definition and management The ability to work autonomously within a multi-skilled team with a good understanding and dedication to achieving project goals Good communication skills with the ability to produce high quality written reports and presentations to internal and external customers Ideally, you will have experience in providing problem assessments, and proposing design solutions within a culture of innovative thinking Desirable, but not essential: Leading design reviews across the product life cycle Technical leadership of junior engineers System level functionality proving If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Principal Systems Engineer - MBSE Location : Gloucester (Hybrid) & Dynamic Working Hours Salary : Up to £57,000 + Company Bonus & Very Good Pension Package Experience needed : Experience with both Systems Engineering and Model Based Systems Engineering is essential for this role. Knowledge of RF systems and data links would be beneficial but is not essential for this role as training can be provided. The ideal candidate would come from a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Principal Systems Engineer who has demonstrable experience in model-based systems engineering to join our team who focus on the creation of the systems behavioural model of a Data Link System within a key product program. This is a rapidly growing team within the business and provides the opportunity to work with a specialist team developing and managing technically challenging technology within the business. What we need from you: Creation and ownership of MBSE behavioural models A strong background in systems engineering across the full product life cycle Requirements definition and management The ability to work autonomously within a multi-skilled team with a good understanding and dedication to achieving project goals Good communication skills with the ability to produce high quality written reports and presentations to internal and external customers Ideally, you will have experience in providing problem assessments, and proposing design solutions within a culture of innovative thinking Desirable, but not essential: Leading design reviews across the product life cycle Technical leadership of junior engineers System level functionality proving If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available: Electrical Fitter Location: Bolton - Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen onsite Experience needed: Experience in manufacturing and testing within the electrical department. Experience working to a high level of workmanship standards and following product certification procedures, as well as keeping within allocated budgets and timescales. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for an Electrical Fitter to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available: Electrical Fitter Location: Bolton - Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen onsite Experience needed: Experience in manufacturing and testing within the electrical department. Experience working to a high level of workmanship standards and following product certification procedures, as well as keeping within allocated budgets and timescales. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for an Electrical Fitter to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Electrical Inspector Location : Bolton - Dynamic Working Hours Salary : Up to £39,000 + Paid Overtime, Company Bonus & Very Good Pension Package About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Manufacturing Electrical Inspector to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Certifying products in line with certification procedures Inspecting finished parts and products for physical damage, defects etc. Producing and maintain good documentation, history sheets and data Ensuring compliance across all manufacturing procedures What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is a mandatory requirement Eagerness to contribute in an environment of process improvement Ability to maintain good housekeeping standards and a safe working environment Ability to use and upkeep specialised inspection tools IPC 610 certified/trained preferred but not mandatory If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Manufacturing Electrical Inspector Location : Bolton - Dynamic Working Hours Salary : Up to £39,000 + Paid Overtime, Company Bonus & Very Good Pension Package About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Manufacturing Electrical Inspector to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Certifying products in line with certification procedures Inspecting finished parts and products for physical damage, defects etc. Producing and maintain good documentation, history sheets and data Ensuring compliance across all manufacturing procedures What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is a mandatory requirement Eagerness to contribute in an environment of process improvement Ability to maintain good housekeeping standards and a safe working environment Ability to use and upkeep specialised inspection tools IPC 610 certified/trained preferred but not mandatory If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Tiro Partners are looking for a Systems Engineering Lead to join a global engineering consultancy on a contract basis. This will be to support a client in the nuclear sector. This is a 12 month contract, outside of IR35 paying £53 per hour. The role supports hybrid working with an 2/3 days a week on site in Derby with more flexibility available later on in the role. Job requirements: Proven Experience with Auxiliary Systems Reactor Gas/Compressed Air Distribution Nuclear Experience Full Systems Engineering Lifecycle Project/Programme Management For more information please apply with an updated copy of your CV or call.
26/04/2024
Contractor
Tiro Partners are looking for a Systems Engineering Lead to join a global engineering consultancy on a contract basis. This will be to support a client in the nuclear sector. This is a 12 month contract, outside of IR35 paying £53 per hour. The role supports hybrid working with an 2/3 days a week on site in Derby with more flexibility available later on in the role. Job requirements: Proven Experience with Auxiliary Systems Reactor Gas/Compressed Air Distribution Nuclear Experience Full Systems Engineering Lifecycle Project/Programme Management For more information please apply with an updated copy of your CV or call.
Job Opportunity: Gas Turbine Stress Analysis Engineer Location: Derby Job Description: Tiro Partners are seeking a highly skilled Gas Turbine Stress Analysis Engineer to join our cleints engineering team. The ideal candidate will have extensive experience in gas turbine stress analysis, particularly with rotating components like discs, blisks, shafts, seals, and airfoils. The role involves using advanced modelling techniques to analyze and ensure the safety and reliability of our products. Responsibilities: Perform stress analysis on gas turbine components, ensuring they meet all technical and functional requirements. Collaborate with cross-functional teams including stress analysis, life management, heat transfer, materials, and design. Engage with global engineering organizations and internal teams to support assigned components. Deliver technical and program presentations to internal and external stakeholders as required. Document design engineering activities through Design Study Summaries, Technical Memorandums, Coordination Memos, and Certification Reports. Education Requirements: Bachelor's degree or equivalent in an engineering discipline (mechanical, aerospace/aeronautical, manufacturing, or similar). Capability Requirements: Extensive experience in gas turbine stress analysis with expertise in 2D and 3D stress analysis of rotating parts. Proficiency in ANSYS Mechanical APDL, Hypermesh, and UG NX. Experience with life analysis (fatigue, damage tolerance, and fracture mechanics) is preferred. Strong technical writing skills and the ability to generate detailed engineering reports. Computer Skills: Proficiency in PC-based Windows applications (Word, Excel, PowerPoint). Knowledge of ANSYS Classic, Hypermesh, UG NX, and PLM Teamcenter.
26/04/2024
Contractor
Job Opportunity: Gas Turbine Stress Analysis Engineer Location: Derby Job Description: Tiro Partners are seeking a highly skilled Gas Turbine Stress Analysis Engineer to join our cleints engineering team. The ideal candidate will have extensive experience in gas turbine stress analysis, particularly with rotating components like discs, blisks, shafts, seals, and airfoils. The role involves using advanced modelling techniques to analyze and ensure the safety and reliability of our products. Responsibilities: Perform stress analysis on gas turbine components, ensuring they meet all technical and functional requirements. Collaborate with cross-functional teams including stress analysis, life management, heat transfer, materials, and design. Engage with global engineering organizations and internal teams to support assigned components. Deliver technical and program presentations to internal and external stakeholders as required. Document design engineering activities through Design Study Summaries, Technical Memorandums, Coordination Memos, and Certification Reports. Education Requirements: Bachelor's degree or equivalent in an engineering discipline (mechanical, aerospace/aeronautical, manufacturing, or similar). Capability Requirements: Extensive experience in gas turbine stress analysis with expertise in 2D and 3D stress analysis of rotating parts. Proficiency in ANSYS Mechanical APDL, Hypermesh, and UG NX. Experience with life analysis (fatigue, damage tolerance, and fracture mechanics) is preferred. Strong technical writing skills and the ability to generate detailed engineering reports. Computer Skills: Proficiency in PC-based Windows applications (Word, Excel, PowerPoint). Knowledge of ANSYS Classic, Hypermesh, UG NX, and PLM Teamcenter.
Tiro Partners are looking for a Systems Design Engineer to join a global engineering consultancy on a contract basis. This will be to support a client in the nuclear sector. This is a contract role, 12 months in length and outside of IR35. The role is paying £36 per hour. The role supports hybrid working with an initial 2/3 days a week on site in Derby with further flexibility later on. Job requirements: Nuclear Experience Pressure Drop/Fluid Flow Component Sizing + Calculations Process Engineering Principles For more information please apply with an updated copy of your CV or call.
26/04/2024
Contractor
Tiro Partners are looking for a Systems Design Engineer to join a global engineering consultancy on a contract basis. This will be to support a client in the nuclear sector. This is a contract role, 12 months in length and outside of IR35. The role is paying £36 per hour. The role supports hybrid working with an initial 2/3 days a week on site in Derby with further flexibility later on. Job requirements: Nuclear Experience Pressure Drop/Fluid Flow Component Sizing + Calculations Process Engineering Principles For more information please apply with an updated copy of your CV or call.
Position Available : Requirements Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Requirements Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Requirements Engineer Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
26/04/2024
Full time
Position Available : Requirements Engineer Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of requirements management and technical report writing within a complex, high-technology manufacturing or engineering industry such as defence, aerospace, automotive, maritime, nuclear and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have several vacancies available as Requirements Engineers to join our team who are responsible for the definition of the seeker system design and the subsystems. As a team we are responsible for supporting our various programmes, working with our customers and suppliers towards developing and integrating the next generation RF seekers. There are numerous progression and development opportunities available, as well as interaction with stakeholders across dynamic engineering teams. What we need from you: Knowledge of requirements management toolsets eg DOORS The ability to define and conduct systems studies in order to inform requirements Good data analysis and technical report writing skills Good communication skills and the ability to work in a cross-functional team It would be great to have experience in some/any of the following: Knowledge of MBSE, Software or firmware knowledge Knowledge of RF systems and Digital Signal Processing Knowledge of performance Model Development processes Experience in, or appreciation of, task package management Experience in product verification and validation Experience across the full product life cycle Hardware experience or an interest in Hardware If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.
26/04/2024
Contractor
Introduction: Our client stands as an approved Maintenance Repair Organisation accredited by both EASA and UK CAA, entrusted with delivering Line & Base Maintenance services for a range of aircraft including the B737 NG, B737 Max, B777, and B787. As part of their ongoing growth, we are seeking B1 Licensed Aircraft Engineers to join our esteemed organisation. Candidates should hold a valid UK CAA Category B1 Part-66 Licence, with type ratings on B737 NG, B777, and/or B787 aircraft. Responsibilities: The B1 Licensed Aircraft Engineer will take charge of supervising Mechanics and overseeing inspection and certification of scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests across Airframe, Engine, and Electrical systems. They will collaborate closely with the Aircraft Check Manager to ensure the completion of daily workload tasks and adherence to the production plan. These positions will be under the guidance of the Maintenance Manager - Production and are stationed at our London Gatwick Hangar facility, offering various shift patterns for flexibility. Key Responsibilities: Supervising Mechanics performing Base Maintenance on customer aircraft. Inspecting and certifying scheduled maintenance tasks, defect rectification, modifications, structural repairs, and functional tests on Airframe, Engine, and Electrical systems. Completing all assigned work promptly to minimise aircraft downtime. Ensuring accurate completion of aircraft technical log books, maintenance documentation, job cards, work packages, and zonal handovers within designated timelines. Maintaining high standards of cleanliness and organisation within assigned work areas. Adhering to regulatory requirements, company processes, and procedures. Fostering a culture of safety and reporting all incidents and occurrences in the Boeing Safety Management System. Highlighting technical issues, discrepancies, or other concerns to the Aircraft Check Manager. Actively contributing to continuous improvement initiatives and lean principles. Assisting the management team in the day-to-day operations of the London Gatwick Operation. Undertaking additional duties as required, including potential work away from London Gatwick. Required Qualifications and Experience: Hold a valid UK CAA Category B1 Part-66 Licence. Type rating on one or more of the following aircraft - B737 NG, B777, or B787. Minimum of 1 year exercising certification privileges in a Line or Base Maintenance environment. Demonstrate 6 months recent experience on type and ability to maintain appropriate company authorisations specific to the role. Thorough understanding of Part-145 regulations. Previous experience using AMOS or other Maintenance Management Systems. Strong communication skills and effective problem-solving abilities. Flexibility to adjust working hours to meet operational demands. Team-oriented mindset with a commitment to exceeding internal and external customer expectations. Proficiency in using Microsoft Office applications and willingness to learn in-house systems. Eligibility to hold a London Gatwick Airport airside pass. Candidates must have the right to live and work in the United Kingdom. Work Authorisation: This position is open to locally hired candidates in the United Kingdom who possess current legal authorisation to work in the country. Sadly, our client will not pursue immigration or labour sponsorship for applicants.